3Com OfficeConnect 3CRWE53172 User Manual page 52

52 C 5: G
HAPTER ATEWAY
C
ONFIGURATION
WEP and 13 characters for 128 bit WEP. You must enter a separate
string for each of the 4 Keys. You can leave a string blank provided
this Key is not selected as the Active Transmit Key.
Passphrase - This is another common method and similar to the 3Com
Encryption string. In 64 bit WEP, the passphrase will generate 4
different keys. However, in 128 bit WEP, this method only generates 1
key which is replicated for all 4 keys. The passphrase can be up to 31
characters long and may contain any alphanumeric characters.
Select the key generation method you wish to use from the drop down
list. If you have other wireless products choose the scheme that is
compatible with these, then enter the appropriate information.
If you encounter any difficulty when you enable WEP ensure that you
check that each key on your wireless computer is exactly the same as
each key on your Gateway. In other words, Key number 1 on the Wireless
computer must have the same Hex number as Key number 1 on the
Gateway, Key 2 on the Wireless computer must match Key 2 on the
Gateway and so on.
The Active Transmit Key selects which of the 4 Keys the Gateway uses
when it transmits. You can change the selected key periodically to
increase the security of your network.
Some wireless adapters have only one key available on their WEP
configuration page. If this is the case ensure it is the same as Key 1 on the
Gateway and that it is selected as the active transmit key.