Rear Panel - 3Com OfficeConnect 3CRWE53172 User Manual

16 C 1: I
HAPTER NTRODUCING THE

Rear Panel

G
ATEWAY
5 Cable/DSL Status LED
Green (100Mbps link) / yellow (10Mbps link)
If the LED is on, the link between the Gateway and the cable or DSL
modem is OK. If the LED is flashing, the link is OK and data is being
transmitted or received. If the LED is off, nothing is connected, the
modem is switched off or there is a problem (refer to
"Troubleshooting").
The rear panel (Figure
Ethernet Cable/DSL port, a power adapter OK LED, and a power adapter
socket.
Figure 4 Gateway - Rear Panel
6
6 Wireless Antennae
The antennae on the product should be placed in a 'V' position when
initially installed.
CAUTION: Do not force the antennae beyond their mechanical stops.
Rotating the antennae further may cause damage.
7 Power Adapter Socket
Only use the power adapter supplied with this Gateway. Do not use any
other adapter.
8 Ethernet Cable/DSL port
Use the supplied patch cable to connect the Gateway to the Ethernet
port on your cable or DSL modem. The port will automatically adjust to
the correct speed and duplex. The Ethernet Cable/DSL port is configured
as MDI, for connection to a cable or DSL modem with a straight through
cable.
9 Four 10/100 LAN ports
Using suitable RJ-45 cable, you can connect your Gateway to a computer,
or to any other piece of equipment that has an Ethernet connection (for
4) of the Gateway contains four LAN ports, one
7 8
Ethernet
Cable/
DSL
Chapter 6
9
4
6
LAN