Connecting The Sas Cable To The Server - HP DW017B - StorageWorks Ultrium 448 Tape Drive User Manual

1.
If installing a new HBA, follow the instructions supplied with the HBA to install it.
2.
Connect the purchased SAS cable to the external SAS connector on the new HBA.
1. SAS connector on server
Figure 28 Connecting the SAS cable to the server
3.
Connect the SAS and power cords to the tape drive and plug the other end of the power cord
into the power outlet.
50
Installing an external Ultrium tape drive by connecting to an external SAS port