Table of Contents
Advertisement
PSM Error Codes
If you experience a problem using Persistent Storage Manager, the following list of event log
messages can be used to troubleshoot. Error codes are logged to the system event log by the
file system driver for Persistent Storage Manager, PSMAN5 driver; each entry appears with
"psman5" as the source name.
Table 5: PSM Error Codes
0x00000001
0x00000002
0x00000003
0x00000005
0x00000005
0x00000005
0x00000005
0x00000006
0x00000015
0x00000016
0x00000017
0x0000001F
NAS 1000s Administration Guide
Error Code
An invalid IOCTL was sent to the driver.
Action: Save the system eventlog and contact technical support
Device name is not recognized by PSM.
Action: Save the system eventlog and contact technical support.
An invalid path was given for the cache file.
Explanation: This error will appear if the cache file cannot be created
because the cache file drive is not present.
Action: Save the system eventlog, contact technical support.
An exception occurred.
Action: Save the system eventlog, contact technical support.
You do not have sufficient rights to the cache file directory.
Action: Make sure you have full access to the cache file directory
The cache file specified is a directory instead of a file.
Action: Give a full path and filename for the cache file.
PSM was told to shut down.
Action: Save the system eventlog and contact technical support.
User performing PSM function without opening PSM.
Action: Programmatically, PSM must be opened before a command can be
submitted.
Access to a virtual volume has been attempted after it has been destroyed.
Action: Do not access virtual volumes after they have been destroyed.
Something has gone wrong with PSM.
Action: Save the system eventlog and contact technical support.
Bad sector was detected in the cache file.
Action: Save the system eventlog and contact technical support.
General failure.
Action: Save the system eventlog and contact technical support.
Description
B
159
Advertisement
Table of Contents
