Table of Contents
Advertisement
Modifying Group Properties
To modify other group properties:
1. From the Local Groups dialog box, select the desired group and then click Properties.
Figure 31: Group Properties dialog box, General tab
Within the Properties dialog box are two tabs:
Each of these tabs is discussed in the following paragraphs.
2. Enter the desired changes in each of the tabs. Then, click OK. The Local Groups dialog
General Tab
Within the General tab, basic group information can be changed, including:
Members Tab
To indicate or change the members of a group, click the Members tab. Within this dialog box,
users are added and removed from a group.
Two boxes are displayed: Members and Add user or group. Current members of that group
are listed in the Members box. All users are listed in the Add user or group box.
NAS 1000s Administration Guide
The Properties dialog box is displayed.
General tab
Members tab
box is displayed again.
Group name
Description
To add an existing local user to a group, select the desired user from the Add user or
group box and then click the Add button.
User and Group Management
71
Advertisement
Table of Contents
