Setup Completion; Managing System Storage; Creating And Managing Users And Groups - HP StorageWorks S1000 - NAS Administration Manual

Setup Completion and Basic Administrative Procedures

Setup Completion

After the NAS device is physically set up and the basic configuration is established, additional
setup steps must be completed. Depending on the deployment scenario of the NAS device,
these steps may vary.
Additional setup steps may include:
Each of these setup steps is discussed in the following sections.

Managing System Storage

The NAS administrator uses Logical Disk Manager to manage disks and volumes, and uses
Persistent Storage Manager to manage snapshots. See the following chapters for more detailed
information on managing system storage:

Creating and Managing Users and Groups

User and group information and permissions determine whether a user can access files. If the
NAS device is deployed into a workgroup environment, this user and group information is
stored locally on the device. By contrast, if the NAS device is deployed into a domain
environment, user and group information is stored on the domain.
To enter local user and group information, see Chapter 4, User and Group Management.
The following information is included:
28
Managing system storage
Creating and managing users and groups
Creating and managing file shares
Installing and configuring data replication software
Chapter 3, Persistent Storage Manager, discusses snapshot management procedures.
Chapter 5, Folder and Share Management, discusses folder and share management
procedures.
Domain compared to workgroup environments
User and group name planning
— Managing user names
— Managing group names
Workgroup user and group management
— Managing local users
— Managing local groups
Drive quotas
— Managing quotas
— Enabling and disabling quota management
— Creating new quota entries for a user or group
— Deleting new quota entries for a user or group
— Modifying new quota entries for a user or group
NAS 1000s Administration Guide