Table of Contents
Advertisement
To set up AppleTalk shares, from the AppleTalk Sharing tab of the Create a New Share
dialog box:
1. Enter a user limit.
2. Enter password information.
3. Indicate whether the share has read only permission or read write permission.
4. After all AFP (AppleTalk) Sharing information is entered, either click the next Sharing
Protocol Parameter Settings
As previously mentioned, the NAS 1000s supports the following protocols:
This section discusses the parameter settings for each protocol type.
To access and enter protocol parameter settings:
1. From the Shares menu, select Sharing Protocols. The File Sharing Protocols dialog box
Figure 56: Sharing Protocols dialog box
NAS 1000s Administration Guide
tab or click OK.
CIFS
NFS
FTP
HTTP
NCP (NetWare)
AFP (AppleTalk)
is displayed.
Folder and Share Management
101
Advertisement
Table of Contents
