Picture Adjustments - Toshiba TLP-511U Owner's Manual

Adjustments

Picture adjustments

– Picture
Preparation
• Display the image as explained in "Picture
Projection".
21
• Set the POINTER/PJ selector to "PJ".
SELECT/ADJUST
ON/STANDBY MENU
AUTO SET ON/STANDBY
KEYSTONE
MARKER LASER
POINTER
1,5
PJ
L-CLICK R-CLICK
MENU ENTER
RGB VIDEO CAMERA
RESIZE RESET FREEZE
1
Press MENU to display the
menu.
2
Press or to select
P i c t u r e
C o n t r a s t –
B r i g h t n e s s –
C o l o r
–
Downloaded from www.Manualslib.com
3
Press
ON
ENTER INPUT
preferred item.
LAMP
TEMP
4
Press
To select another item, go back to step 3.
2-4
RESET
.
+
+
+
manuals search engine
T i n t –
S h a r p n e s s
–
R - l e v e l –
G - l e v e l –
B - l e v e l –
C ame r a g a i n
–
or to select a
or to adjust the item.
– : + :
Contrast : (–) Lower
(+) Higher
Brightness: (–) Darker
(+) Brighter
Color: (–) Duller
(+) Brighter
Tint: (–) Redder
(+) Greener
Sharpness: (–) Softer
(+) Sharper
R-level: (–) To reduce red
(+) To increase red
G-level: (–) To reduce green
(+) To increase green
B-level: (–) To reduce blue
(+) To increase blue
Camera gain: (For document imaging
+
camera model only)
+
+
+
+
+
5
Press MENU.
The menu disappears.
Notes
• The adjustment can be stored on each input
source (RGB, Video, Camera).
• "Tint" adjustment is not available for PAL nor
SECAM signals.
• "Color", "Tint" and "Sharpness" adjustments
are not possible when RGB input is selected.
• "Tint" and "Sharpness" adjustments are not
possible when camera input is selected.
• "Tint" and "Sharpness" adjustments are not
possible when Y/Pb/Pr signals are input.
• These adjustments are stored until you turn
the power off.
• To store the adjustments even if the power is
turned off, follow the procedure of "Saving
data".
34
• Pressing RESET will return all the
adjustments or settings currently displayed to
their default.
32
CONTENTS
(–) To lower the camera
sensitivity when the
subject is too bright.
(+) To raise the camera
sensitivity when the
subject is too dark.