Picture Projection - Toshiba TLP-511U Owner's Manual

Operations

Picture projection

CAUTION
Do not look into the projection lens while
operating the projector.
Preparation
• Install and connect the projector properly.
• Take off the lens cover.
• Set the POINTER/PJ to "PJ".
SELECT/ADJUST
ON/STANDBY MENU
1
5
Downloaded from www.Manualslib.com
ON
ENTER INPUT
LAMP
1
Press ON/STANDBY.
TEMP
Both the ON and LAMP indicators light up
in green.
3
Indicators
ON
LAMP
2
Turn on the connected
equipment and put it in
playback mode.
4
manuals search engine
AUTO SET ON/STANDBY
1
KEYSTONE
MARKER LASER
POINTER
PJ
L-CLICK R-CLICK
MENU ENTER
RGB VIDEO CAMERA 3
RESIZE RESET FREEZE
ON
On (Green) On (Green)
LAMP
Flashing (Green)
On (Green)
CONTENTS
3
Select the input source.
(On the remote control)
Press RGB or VIDEO.
(On the control panel of the main unit)
Press INPUT repeatedly.
Each time the button is pressed, the
source indication on the screen changes
as follows:
RGB: To project pictures from a
computer connected to RGB
INPUT.
Video: To project pictures from a
video player connected to
VIDEO INPUT.
Camera: To project pictures from a
document imaging camera.
(For document imaging
camera model only)
4
Adjust the picture size by
turning the zooming ring.
Turn to the right to enlarge the picture.
Turn to the left to reduce the picture.
5
Focus on the picture by
turning the focusing ring.
A still picture is recommended for
focusing.
21
(Continued)