Toshiba TLP-511U Owner's Manual page 19

Connections and installation
(Continued)
1
Place the projector on a steady,
level surface such as a table.
Point the projector squarely at the screen
for the best possible picture.
Top view
Screen
90
Point the lens straight at the center of the
screen as above.
Side view
Screen
90
Place the projector horizontally so that the
projecting light hits the screen squarely.
Downloaded from www.Manualslib.com
2
Adjust the distance between
the lens and the screen.
The projection size depends on the
distance between the lens and the
screen.
Adjust the projection size by changing the
distances as shown below.
b
a: Distance between the lens and the screen
b: Distance between the lens height and the
bottom of projection area
Screen size
(inches)
23
40
60
80
100
150
200
250
• The values are approximations.
manuals search engine
Screen
Lens
90
a
a (m)
Minimum Maximum
(WIDE) (TELE) b (cm)
– 1.132
1.56 2.017
2.373 3.059
3.186 4.1 12
3.999 4.142 15
6.031 7.746 23
8.064 10.35 30
10.096 – 38
3
Connect the power cord.
• Insert one end in the AC IN socket on
the projector.
• Insert the other end in a wall outlet.
To a wall outlet.
The ON indicator lights in orange and the
projector turns to standby mode.
4
Take off the lens cover.
4
6
9
19
CONTENTS
(Continued)