Toshiba TLP-511U Owner's Manual page 44

3lcd data projector
Hide thumbs Also See for TLP-511U:
Table of Contents

Advertisement

Others
(Continued)
Image does not appear when using the
document imaging camera.
• The wrong input is selected.
Select the correct input source.
Image is out of focus or not clear when
using the document imaging camera.
• The camera lens is dirty.
Clean the camera lens.
Use a lens cleaner to clean the lens.
• The document imaging camera is out of
focus.
Focus the document imaging camera.
38
• Focus between main unit and screen is
not correct.
Focus the picture by turning the
focusing ring.
21
• The light is not on.
The image may not be projected clearly if
the light is not on.
Turn on the light.
Downloaded from
www.Manualslib.com
The remote control does not work.
• The remote control is not facing the
remote sensor.
37
• The remote control is too far.
• There is an obstruction between the
41
remote control and the remote sensor.
• The batteries are exhausted.
• The operating mode of the remote
control is not set correctly.
37
manuals search engine
Face the remote control transmitter
toward the remote sensor on the
projector.
15
Operate within about 5 meters.
Remove the obstacle.
Replace the batteries.
14
Set the POINTER/PJ selector
according to the equipment you want
13
to control.
15
44
CONTENTS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tlp450uTlp451uTlp650uTlp651u

Table of Contents