WARNING: Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate USA only the equipment.
IMPORTANT SAFETY INSTRUCTIONS (Continued) 5. Heat 8. Power-Cord Protection The product should be situated Power-supply cords should be away from heat sources such as routed so that they are not likely to radiators, heat registers, stoves, or be walked on or pinched by items other products (including placed upon or against them, amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS (Continued) 16. Damage Requiring Service 18. Servicing Unplug this product from the wall Do not attempt to service this outlet and refer servicing to product yourself as opening or qualified service personnel under removing covers may expose you the following conditions: to dangerous voltage or other a) When the power-supply cord or...
LABEL LOCATIONS CAUTION Label MODEL NO. / SERIAL NO. Label RATING Label MANUFACTURED; WARNING Label 3.3A SERIAL NO. 1.5A CAUTION Label WARNING Label CAUTION Label (LED) CAUTION Label (LASER) Remote Control Models with Document Camera LASER WARNING CAUTION Label (LASER) Models with Document Camera POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable.
Checking the package contents Please make sure that the following items are included in the box, along with the main unit. If an item is missing, please contact the store from which you purchased the product immediately. (10) (11) (12) (1) Remote control (8) RGB cable (2) LR03 (SIZE AAA) dry-cell batteries...
Names of each part on the control panel and remote control Control panel Remote Control Front Remote control transmitter INPUT ON/STANDBY AUTO KEYSTONE (19) MENU VOL.- AUTO SET VOL. + VOL. - PJ MODE LASER (18) MENU / ENTER R-CLICK (17) INPUT TEMP LAMP...
Names of the connection terminals I Removing the connection terminal cover Press on the circle (“O”) while sliding the cover in the direction of the arrow. The cover will come off. MONITOR COMPUTER ( Y,P CONTROL VIDEO AUDIO R - AUDIO - L VIDEO S-VIDEO (1) COMPUTER 2 terminal...
Preparing and using the remote control (Continued) I Switching operation modes Operation modes should be switched between projector operation and computer operation. Switching the remote control operation mode. Pressing this button toggles the mode. When this button is lit, the remote control is in [PJ Mode] (Projector operation mode).
Connection Before connection • Read the owner’s manual of the device to be connected to the projector. • Some types of computer cannot be used connected to this projector. Check for an RGB output terminal, supported signal p.69 • Turn off the power of both devices before connection. •...
Operations I How to uninstall Select [Start Menu] → [Settings] → [Control Panel] → [Add/Remove Programs], and remove Toshiba Data Projector from currently installed programs. Turning the power on and off I Connecting the power cord Insert the power cord connector into the AC IN socket of the projector.
Turning the power on and off (Continued) I Turning the power off Press the ON/STANDBY button. A message appears on the screen, confirming that you wish to shut off the power. This message will disappear after a moment. (This operation is no longer valid after the message disappears.) Press the ON/STANDBY button again.
Basic operations (Continued) Projector placement angle adjustments The placement angle and the height of the projected image can be adjusted by the foot adjuster. q Lift up the front of the projector until it is at the desired angle, then press the foot adjuster release button.
Using handy features (Continued) I Correcting the keystone distortion (Keystone) p.28 When the foot adjuster is used to change the projection angle, the picture will undergo keystone (trap- ezoidal) distortion. This projector is capable of correcting this keystone distortion. Before correction After correction q Press the AUTO KEYSTONE button.
LAN PC card and dedicated Wireless Utility software are used. Note: A wireless LAN PC card except the supplied one (or recommended by Toshiba) does not work with this product. Please ask your dealer about the available wireless LAN PC card.
Using the wireless LAN PC card (Continued) I Caution when using the wireless LAN functions The Wireless LAN in this unit uses the 2.4 GHz waveband. If there is a similar wireless LAN in the area, or a wireless device using the 2.4 GHz waveband, or a microwave oven, the communication efficiency of this apparatus will be reduced, and may become unusable, but it is not a fault.
Using the wireless LAN PC card (Continued) I Displaying a computer’s screen via the projector Launch the Wireless Utility software application. When the Wireless Utility launches, the Screen image transmission mode window appears on the computer screen. To switch to the Screen image transmission mode window from another mode (File or Document camera), click on the Screen Image icon Select Transmission mode.
Using the wireless LAN PC card (Continued) I Displaying a JPEG image saved on a computer via the projector Launch the Wireless Utility software application. The Screen image transmission mode window appears on the computer’s screen. Click on the File icon The Wireless Utility window changes to File transmission mode.
Projecting images stored in a memory PC card (Continued) I JPEG files 1) Folder names may be up to 19 characters long, and file names up to 14 characters including file extensions. 2) Supported file extensions are jpg, JPG, jpeg, and JPEG. 3) The maximum number including both folders and files is 512.
Projecting images stored in a memory PC card (Continued) The following functions can be used via remote control operation and menu settings. Slide show function • Press the remote control’s button when a slide is displayed to begin a slide show, and cycle through the slides automatically.
Using the document camera (Continued) Press the CAMERA button, and select camera input. • The input returns to the previous input when the CAMERA button is pressed again. • Camera input can also be selected by pressing the remote control or camera’s INPUT button. Move the camera head up and down to adjust the image size.
Using the document camera (Continued) Press the W.BALANCE button. The LOCK indicator lights. The white balance is locked. The white balance returns to automatic adjustment when pressing the W.BALANCE button again. Then LOCK indicator goes out. Notes • When the white balance is locked (the LOCK indicator is lit), folding and extending the arm will automatically return to automatic adjustment.
Using the document camera (Continued) r Select the projector on which the images were temporarily saved in step A list of the MAC addresses of the wireless LAN PC cards p.32 p.60 mounted on the projectors that are available for communication appears.
OS, that is equipped with a USB port which can support USB1.1 (The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh). However, please note that Toshiba does not guarantee the operation of all computers. Connecting a computer Connect the projector to a computer using the supplied USB cable.
Using the menus (Continued) I The image adjustment menus Use this menu to adjust image-related items. Items Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”. Item Description Computer Y/P Contrast Lower Higher Brightness Darker Brighter...
Using the menus (Continued) G When the wireless LAN PC card is being used Item Description Input select mode Manual Auto (Switch to PC card input when the PC card is inserted) Transmission mode Ad hoc Infrastructure Channel See page 34 p.34 Encryption : Enter setting mode]...
Lens and main unit cleaning I Lens cleaning • Clean the lens with a commercially available blower and/or lens cleaner. • The lens is easily scratched, so do not rub it with hard objects, or strike it. I Main unit cleaning •...
How to use the supplied software Please read this chapter if the model you purchased includes a PC card slot. This chapter briefly describes how to use supplied software applications other than the Wireless utility. I How to use the Projector Configuration Tool The Projector Configuration Tool is a software utility that allows you to set up the projector for Infrastructure mode communications using a wireless LAN PC card.
How to use the supplied software (Continued) I How to use the JPEG Conversion Tool The JPEG Conversion Tool converts JPEG files not supported by the projector, image ® ® files in other formats, Microsoft PowerPoint files, and the like into JPEG files supported by the projector.
How to use the supplied software (Continued) Making a presentation with converted JPEG files 1) Copy the folder created by the JPEG Conversion Tool, or its contents, onto a memory PC card. 2) Use the steps in “Projecting images stored in a memory PC card” display a list of thumbnails.
Before calling service personnel If you think something is wrong, check the following before contacting customer service. Please see “Trouble indications” as well. p.65 If This Happens Check • Is the power cord plugged in? Is it connected to the projector? No power p.65 •...
Specifications I List of general specifications Item Specification Consumption Power 265 W TLP-T720/T520/T520E: 3.4 kg Weight TLP-T721/T521/T521E: 4.1 kg Models without document imaging camera: 298 × 97 × 249 mm (W × H × D) External Dimensions (including protruding parts) Models equipped with document imaging camera: 298 ×...
Specifications (Continued) I List of supported signals (Y/P signals) Signal format fh(kHz) 480i(525i)@60Hz 15.73 480p(525p)@60Hz 31.47 576i(625i)@50Hz 15.63 576p(625p)@50Hz 31.25 720p(750p)@60Hz 45.00 720p(750p)@50Hz 37.50 1080i(1125i)@60Hz 33.75 1080i(1125i)@50Hz 28.13 1035i(1125i)@60Hz 33.75 1152i(1250i)@50Hz 31.25 I List of supported signals (Video, S-Video signals) Video mode fh(kHz) fv(Hz)