Adjusting The Image; Adjusting The Color Temperature; Progressive; Lamp Setting - Sharp PG-F200X - Notevision XGA DLP Projector Operation Manual

Picture Adjustment ("Picture" Menu)
(Continued)

2 Adjusting the Image

2 2
2 2
Adjustment
items
Contrast For less
contrast.
Bright For less
brightness.
Red* 1 For weaker red.
1
Blue* For weaker
blue.
Color* 2 For less color
intensity.
2 3
Tint* * For making skin
tones purplish.
Sharp* 2 For less
sharpness.
1
Bright Boost* For high fidelity
color reproduc-
tion.
*1 Not adjustable/selectable when selecting "sRGB".
*2 Not displayed in the RGB input mode.
*3 "Tone" will appear on the menu screen only when
PAL or SECAM signals are input (including when
forcibly changed to those input signals). There is
basically no need to adjust "Tone", but you can
adjust the picture tone with this adjustment when
inputting PAL or SECAM signals .
Note
• "Bright Boost" and "CLR Temp" cannot be set
when "sRGB" is selected.
• To reset all adjustment items, select "Reset"
and press ENTER.
3 Adjusting the Color
3 3 3 3
Temperature
Selectable
items
For lower color temperature for
–2 warmer, reddish incandescent-like
–1 images.
0
1
For higher color temperature for
2
cooler, bluish, fluorescent-like images.
Note
• Values on "CLR Temp" are only for general
standard purposes.
40
O button Q button
For more
contrast.
For more
brightness.
For stronger red.
For stronger
blue.
For more color
intensity.
For making skin
tones greenish.
For more
sharpness.
For more
vividness.
Description
P
R
Menu operation n Page

4 Progressive

4 4
4 4
Selectable
items
2D Useful to display fast-moving images
Progressive such as sports.
Useful to display relatively slow-
3D
Progressive moving images such as drama and
documentary more clearly.
Film Mode Reproduces the image of film source*
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image.
Note
• In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
• When using progressive inputs, inputs are di-
rectly displayed so that 2D Progressive, 3D
Progressive and Film Mode cannot be selected.

5 Lamp Setting

5 5
5 5
Selectable
Brightness and Power consumption
items
Eco + Quiet
Bright
Note
• In the Eco + Quiet mode, the fan sound and
power consumption are lower than those in
the Bright mode. (Projection brightness de-
creases as shown in the chart.) The lamp life
will be approximately 3,000 hours (approxi-
mately 2,000 hours in the Bright mode).
37
Description
Approx. 80%
100%