Troubleshooting With The "Help" Menu; Utilizing The "Help" Menu Functions - Sharp PG-F200X - Notevision XGA DLP Projector Operation Manual

Troubleshooting with the "Help" Menu

This function advises you to solve the problems during usage.
Utilizing the "Help" Menu
Functions
Example: When image flickering appears
Operation to solve image flickering when pro-
jecting the computer RGB signal.
1
Press MENU/HELP.
2
Press O or Q to select "Help", then
press ENTER.
3
Press P or R to select "Vertical
stripes or flickering image ap-
pears" on Help menu, then press
ENTER.
Picture
Vertical stripes or flickering image appear
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL.
Vertical stripes or flickering image appear
Initiate "Auto Sync" Adjustments.
If there is no change after performing "Auto Sync"
adjustments, adjust the following items.
Adjust vertical noise
Adjust horizontal noise
Reset the 2 items above
Return
Signal Info
H
SEL.
46
SCR - ADJ PRJ - ADJ Help
ENTER END
Press ENTER.
Help
1024 768
48.3 kHz / V 59.9 Hz
ENTER END
4
Select "Initiate "Auto Sync" Ad-
justments", then press ENTER.
5
If the image is not improved, se-
lect "Adjust horizontal noise",
then press ENTER.
6
Press O or Q to adjust.
Phase
SEL./ADJ.
Note
• You can adjust the items with check marks (✔).
• The items in the "Help" menu change, de-
pending on the input signal or setting that you
have selected.
• If the problem is not solved, refer to
"Troubleshooting". (see pages
• When selecting "sRGB" in "Picture Mode", the
item "Color is faded or poor" is not displayed.
This means you cannot change input signal
types.
ENTER button
Adjustment buttons
(P/R/O/Q)
MENU/HELP
button
Help
0
Rtn. Menu END
61 and 62)