Picture Adjustment ("Picture" Menu); Adjusting The Image; Adjusting The Color Temperature - Sharp AN-K2LP Operation Manual

Picture Adjustment ("Picture" menu)

You can adjust the projector's picture to your preferences using the "Picture" menu.

Adjusting the Image

Menu operation Page 38
Note
• First select "Memory 1-5" or "Memory OFF"
when you want to save the "Picture" menu set-
tings. See page 44 for details.
Example: "Picture" menu screen for
INPUT 1 mode
Description of Adjustment Items
Press \
Selectable items
Contrast
For less contrast
Bright
For less brightness
Color
For less color intensity
Tint
For making skin tones purplish
Sharp
For less sharpness
Red
For weaker red
Blue
For weaker blue
Note
• "Color", "Tint" and "Sharp" do not appear for
RGB input in INPUT 5 mode.
• To reset all adjustment items, select "Reset" on
the "Picture" menu screen and press
• "Tint" cannot be used with PAL, SECAM, PAL-
M, PAL-N or PAL-60.
• "Color", "Tint" and "Sharp" cannot be used in
the DIGITAL mode.
-42
Press |
For more contrast
For more brightness
For more color intensity
For making skin tones greenish
For more sharpness
For stronger red
For stronger blue
.

Adjusting the Color Temperature

This function allows for selecting the desired
color temperature. With the lower value selected,
the projected image becomes warmer, reddish
and incandescent-like while with the higher
value, the image becomes cooler, bluish and fluo-
rescent-like.
Menu operation Page 40
Example: "Picture" menu screen for
INPUT 1 mode
Description of Color Temperature Settings
CLR Temp
5500K The less the value is set to, the warmer,
6500K reddish, incandescent-like the image becomes.
7500K
8500K
9300K The more the value is set to, the cooler,
10500K bluish, fluorescent-like the image becomes.
"CLR Temp" is fine adjusted by following the procedure below.
1
Select "CLR Temp" in the "Picture"
menu on the menu screen and
press .
• A single menu bar of "CLR Temp" is displayed.
2
' ' ' ' or "
Press '
color temperature.
• With the lower value selected, the projected
image becomes magenta-tinged. With the
higher value selected, the projected image
becomes green-tinged.
• Pressing \ or | changes the value of the
color temperature in the sub menu.
Note
• Values on "CLR Temp" are only for general standard purposes.
Description
" " to fine adjust the " "