Understanding The Printer Operator Panel - Lexmark 920dn - C Color LED Printer Manual

Understanding the
printer operator panel
Back
Menu
Stop
Indicator light
Navigation buttons
Button
Back
Menu
Stop
Indicator light
The printer operator panel is a 4-line, back-lit, gray scale display that can show both
graphics and text. The Back, Menu, and Stop buttons are located to the left of the
operator panel, the navigation buttons are located below the panel, and the numeric pad
is located to the right of the panel.
The use of the buttons and the layout of the display panel is described in the following
table.
Function
Press the Back button to return to the last screen viewed.
Note: Changes made on a screen will not be applied if you press the Back button.
Press the Menu button to open the menu index.
Note: The printer must be in the Ready state to access the menu index. A message indicating the menus
are unavailable will appear if the printer is not ready.
Press the Stop button to stop the mechanical operation of the printer. After pressing Stop, the message
Stopping is displayed. When the printer has stopped, the status line in the operator panel will show
Stopped, and a list of options will appear.
A two-toned LED is used on the operator panel, one color being green and the other being red. The lights
indicate whether the printer power is on, the printer is busy, idle, processing a job, or requires operator
intervention.
Status Indicates
Off Power is off
Solid green Printer is on, but idle
Blinking green Printer is warming up, processing data, or printing a job.
Solid red Operator intervention is required.
Using printer menus
5
Numeric pad
USB Direct interface
Select button