Lexmark 920dn - C Color LED Printer Manual page 43

Message
Invalid Network Code
Invalid Engine Code
Invalid PIN
Load manual feeder with
<Custom Type>
Load manual feeder with
<Custom String>
Load manual feeder with <size>
Load manual feeder with
<size> <type>
Load <src> with <Custom Type Name> • Load the input source with the correct type and size media.
Load <src> with <Custom String>
Load <src> <size>
Load <src> <type> <size>
Load Staples
Maintenance
Menus are Disabled
Network
Network <x>
Network <x>, <y>
No DRAM installed
No held jobs
No jobs found
No jobs to cancel
No recognized file types
Parallel
Parallel <x>
Port disabled Remove USB drive
Power Saver
Action
Download valid code to the internal print server.
Note: You can download network code while this message is displayed.
Download valid engine code to the printer.
Note: You can download engine code while this message is displayed.
Enter the correct PIN.
• Load the specified paper in the manual feed tray or multipurpose feeder.
• Select Continue to ignore the manual feed request and print on paper already
installed in one of the input sources.
If the printer finds a tray that has paper of the correct type and size, it feeds paper from
that tray. If the printer cannot find a tray with the correct paper type and size, it prints
on whatever paper is installed in the default input source.
• Cancel the current job.
• Cancel the current job.
• Install a new staple cartridge in the stapler.
• Select Continue to clear the message and print without stapling.
• Cancel the current job.
Replace the maintenance items and, if necessary, reset the printer maintenance counter.
The printer menus are disabled. You cannot change the printer settings from the operator
panel.
Note: You can still cancel a job, print a confidential job, or print a held job.
• Contact your system support person.
A network interface is the active communication link.
A network interface is the active communication link, where <x> represents the active
communication link, and <y> represents the channel.
Turn the printer off, and install DRAM.
Wait for the message to clear.
Note: The four-digit personal identification number (PIN) you entered is not associated
with any confidential print job.
• Select Try again to enter another PIN.
• Select Cancel to exit the Enter PIN screen.
Wait for the message to clear.
Wait for the message to clear.
Note: The only supported file type is PDF.
A parallel interface is the active communication link.
Wait for the message to clear.
• Send a job to print.
• Press Select to warm the printer to normal operating temperature and display the
Ready message.
Understanding printer messages
43