Settings - Lexmark 920dn - C Color LED Printer Manual

Settings

Setup Menu
Menu selection Purpose
Display Language Determines the language of the text
displayed on the operator panel.
Power Saver Specifies the amount of time (in minutes)
the printer waits after a job is printed
before it goes into a reduced power state.
Use this menu selection to configure a variety of printer features.
Values
English
Français
Deutsch
Italiano
Español
Dansk
Norsk
Nederlands
Svenska
Português
Suomi
Russian
Polski
Hungarian
Turkish
Czech
Simplified Chinese
Traditional Chinese
Korean
Japanese
1...240
Using printer menus
17
Note: All values may not be available.
Specifies the amount of time after a print job
before the printer goes into Power Saver
mode. (Your printer may not support the
entire range of values.)
The factory default Power Saver setting
depends on your printer model. Print the
menu settings page to determine the
current Power Saver setting. When the
printer is in Power Saver mode, it is still
ready to receive print jobs.
Select 1 to put the printer in Power Saver
mode one minute after it finishes a print job.
This uses much less energy, but requires
more warm-up time for the printer. Select 1
if your printer shares an electrical circuit
with room lighting and you notice lights
flickering.
Select a high value if your printer is in
constant use. Under most circumstances,
this keeps the printer ready to print with
minimum warm-up time. Select a value
between 1 and 240 minutes if you want a
balance between energy consumption and
a shorter warm-up period.