Power Save Mode; Two Screen Table - Hitachi CMP4202U User Manual

OTHERFEATURES (continued)

Power Save Mode

When the RGB input is selected
• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activated automatically when the
computer is not being used to reduce power consumption by this unit.
RGB sync signal
Video signal
Operation mode
Indicating lamp
Power consumption
When the Video Input is selected
This function can only be used when the optional video unit has been inserted.
• When there is no video signal input, the power-saving system operates to reduce the power consumed by the sunit.
Video signal
Screen display
Operation mode
Indicating lamp
Power consumption
Returning to operating status
• Operate the personal computer, or press either the INPUT SELECT button of the main unit or the RGB//VIDEO button of the remote control.
* During two-screen displayed, the power save mode will not be activated even if the horizontal/vertical sync signal (or video signal) is no longer
input.

TWO SCREEN TABLE

Horizontal Yes
Vertical Yes
Active (normal display)
On
Lights green
370W
Yes
Active (normal display)
On
Lights green
370W
No Yes
Yes No
Blank (no video)
Off
Lights orange
1W or less (100-120V)
2W or less (200-240V)
No
Blank (no video)
Off
Lights orange
1W or less (100-120V)
2W or less (200-240V)
No
No
Notes
PC window
PC window
Two screens
Two screens
Two screens
Two screens