Other Features; Automatic Store; Signal Check - Hitachi CMP4202U User Manual

OTHER FEATURES

Automatic Store

Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.
Menu Display
PICTURE OPERATE MODE
VIDEO LEVEL
3D COMB
SOUND VOLUME
BALANCE
TREBLE
BASS
MUTE LEVEL
DISPLAY SIDE AREA
FUNCTION RGB1 SIGNAL
RGB2 SIGNAL
COMPONENT1
COMPONENT2
COMPONENT
(VIDEO2)
COLOR SYSTEM
OTHER
AUTO DISPLAY
LANGUAGE
ID NO.
ORBITER
MOVING TIMER
INVERSE
WHITE
PICTURE CONTRAST
BRIGHTNESS
COLOR
TINT
GAMMA
COLOR TEMP.
CONTRAST MODE
FILM MODE
DISPLAY DISPLAY SIZE
• The previously recorded items will be lost.
• The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity. Different signals with which all the
elements are the same or similar will be handled as the same signal.

Signal Check

Changes in the signal status are displayed on the screen as they arise.
Status
When AUTO DISPLAY is set to
ON, the input signal is switched or
when the RECALL button is
pressed.
When the sync signal is no longer
detected.
When the input signal does not
match the monitor specifications
or is in an unstable status.
Registration condition
Can register 1 group.
Can register for every input
function.
Display
A guide is displayed for the input
terminal and the horizontal and
vertical sync frequency.
• A guide displays NO SYNC
SIGNAL, and POWER SAVE (for
approx. 5 sec.)
• When the condition continues
where the sync signal cannot be
detected, indicator lamp of
power source changes in
orange and the mode switches
to power save mode.
A guide displays OUT OF
FREQUENCY.
Menu Display
SHARPNESS
PICTURE
VIDEO PICTURE
BLACK STRETCH
LTI
CTI
YNR
CNR
DISPLAY V.POSITION
H.POSITION
CLOCK
PHASE
PICTURE ENHANCER
FILTER
MODE
DISPLAY WIDE MODE
FUNCTION RGB1 SIGNAL
RGB2 SIGNAL
COMPONENT1
COMPONENT2
PICTURE R-GAIN
G-GAIN
B-GAIN
: When the optional video unit has been inserted.
Action
Recheck the personal computer
power switch status and the
connection status.
Recheck the input signal
specifications.
Registration condition
Can register for every input
function in a video signal input.
Can register 1 group every signal
mode.
Can register settings every RGB1,
RGB2 input (RGB mode).
Can register settings every RGB
functions and video functions.
RGB1
[RGB]
H : 46.5kHz V : 60Hz
VIDEO
This function can only be used when the optional
video unit has been inserted.
VIDEO2
[COMPONENT]
POWER SAVE
OUT OF FREQUENCY