Power Save Mode - Hitachi 42PD8800TA User Manual

FUNCTION (continued)

Power Save Mode

When AV input is selected
You are provided the function to save power consumption when no signal is detected in AV input. Set to On in "Video
Power Save" from Function Menu, which leads to the power save mode in AV1 /AV2 /HDMI1 /HDMI2 and the
Standby mode in other AV input. (Please see the table below for details) Refer to
AV1, AV2,
HDMI1, HDMI2
AV3~AV5
When the RGB input is selected
When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set
to be activated automatically when the computer is not being used to reduce power consumption by this unit.
RGB sync signal
Returning to operating status
Operate the personal computer, or press either the INPUT SELECT button of the control panel or the RGB button
of the remote control.
Downloaded From TV-Manual.com Manuals
PW3-12th-P51-P60.indd 52 PW3-12th-P51-P60.indd 52
42PD8800TA 55PD8800TA
When no signal is detected
Condition
Power Save
Standby
Horizontal
Vertical
PC signal
Operation mode
Indicating lamp
When signal is input during
On in "Video Power Save"
Indicating Lamp
Orange
Red
Yes
Yes
Active (normal display)
On
Lights green
HITACHI
about "Video Power Save" .
27
Turns On automatically.
Remains as Standby mode.
No Yes No
Yes No No
Blank (no display)
Off
Lights orange
52
2005/11/14 13:38:29 2005/11/14 13:38:29