Input Switching; Volume Adjustment; Audio Mute - Hitachi CMP4202U User Manual

OPERATING INSTRUCTIONS (continued)
INPUT SELECT button
MUTE button
AUTO PinP
RGB/VIDEO
RGB 1 RGB 2
buttons
MENU
ID

Input Switching

Input can be switched by pressing the RGB1, RGB2,
VIDEO 1 or VIDEO 2 buttons of the remote control.
Input can be switched in the sequence of RGB1
RGB2 VIDEO 1 VIDEO 2 by pressing the INPUT
SELECT button of the monitor.
When INPUT SELECT is pressed:
RGB1 (D-sub input)
RGB2 (D-sub input)
VIDEO1 (composite or S input)
VIDEO2 (component input)
• If the video unit is not installed, you cannot switch to VIDEO1 and
VIDEO2.
• When the same signal is input to RGB1 and RGB2, the phases may
be slightly misaligned. This is not a malfunction. In such case,
please change one refresh rate (Vertical frequency
apparatus to be used.
VOLUME buttons
VOL
VOLUME
MUTE VOL
UP/DOWN buttons
SIZE RECALL
VIDEO 1 VIDEO 2
RETURN
ENTER
ID SET
) of the

Volume Adjustment

The volume can be adjusted by pressing the VOL+ and
VOL- buttons of the remote control (or the L and M
volume buttons of the monitor unit) while the on-screen
display system is not being displayed.
VOLUME 15
Adjustment status guide display
• When a button is pressed, the volume adjustment
status guide will be displayed.
• The volume will increase when the VOL+ (or L ) button is
pressed while the guide is being displayed.
• The volume will decrease when the VOL- (or M ) button is
pressed while the guide is being displayed.
• The volume can also be adjusted with the on-screen
display system.

Audio Mute

The audio volume can be temporarily lowered to the
mute volume level by pressing the MUTE button of the
remote control.
VOLUME 15
Adjustment status guide display
(The display color will change to pink.)
• When a button is pressed, the word MUTE (in pink) and
the volume adjustment status guide will be displayed.
• The volume setting can be lowered by pressing the VOL- button
while the audio is muted.
• The muting can be cancelled by pressing the VOL+ button while
the audio is muted.
• When audio is muted with the on-screen display
system, the volume setting can be adjusted.
When the MUTE button of the remote control is pressed
again, muting will be canceled, the volume display (blue)
will appear and sound will be output.
Volume setting value
Volume setting value