Product Specifications - Hitachi CMP4202U User Manual

PRODUCT SPECIFICATIONS

Product specifications and designs are subject to change without notice.
Display
dimensions
Panel
Resolution
Input terminals
Input signals
Video signals
Sync signals
Video output Signal
Recommended Signal
Audio output terminal
Input power
External dimensions
Mass
Temperature
Ambient
conditions
Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
• The monitor takes at least 30 minutes to attain the status of optimal picture quality.
This function can only be used when the optional video unit has been inserted.
Signal Input
RGB terminal (D-sub 15-pin connector)
Pin
1
2 G. video or sync on green (Y)
3
4
5
6
7
8
9
10
11
12
13 H. sync or H/V composite sync
14
15
Approx. 42 inches (922 mm (H), vertical 522 mm (V), diagonal 1059 mm)
1024 (H) x 1024 (V) pixels
RGB input
RGB one-line two input terminals (D-sub 15-pin)
RGB audio two-line two input terminals
0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
1080/50i, 1080/60i
H/V separate, TTL level [2KΩ]
H/V composite, TTL level [2KΩ]
Sync on green, 0.3 Vp-p [75Ω]
-
31 modes
10W + 10W (6Ω)
AC100 - 120 / 200 - 240V(automatically selected) 3.7A / 2A
Power consumption 370W
1030 (W) x 636 (H)x 89 (D) (mm) (excluding the stand)
31kg (excluding the stand), 35kg (When mounted on optional stand.)
Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C
Input signal
R. video (P /C )
R R
B. video (P /C )
B B
No connection
No connection
R.GND (P /C , GND)
R R
G.GND (Y, GND)
B.GND (P /C , GND)
B B
No connection
GND
No connection
[SDA]
V.sync. [V.CLK]
[SCL]
( ) : With RGB component input
Video 1 video input terminal (RCA)
Video 1 audio input terminals (left, right) (RCA)
(3.5mm Stereo mini jack) Video 1 S video input terminal (S)
Video 2 video input terminals (Y) (Pb/Cb) (Pr/Cr) (RCA)
Video 2 audio input terminals (left, right) (RCA)
VIDEO input 1 : NTSC, NTSC-4.43, M-PAL, PAL60, PAL,
VIDEO input 2 : 480/60i, 480/60p, 720/60p, 1080/60i, 1035/60i,
-
-
-
Through output (RCA) of VIDEO1 input.
16 modes
• When different kinds of input signals are simultaneously input to
the monitor via a graphics board or the like, the monitor will
automatically select the signals in the following priority order:
Sync signal type
H/V separate sync.
H/V composite sync.
sync.on Green *
*Even in the case of the recommended signals shown on the
following page, there may be instances when correct display is
not possible. In this case, use H/V separate sync, H/V composite
sync.
VIDEO input*
N-PAL, SECAM
576/50i, 576/50P, 1080/50i
Priority
1
2
3