Other Menu - Hitachi CMP4202U User Manual

OPERATING INSTRUCTIONS (continued)

OTHER MENU

MENU
Selected characters
Set to ON.
Information is displayed
AUTO DISPLAY
when switching inputs and
changing signals.
OFF TIMER
ENGLISH
LANGUAGE
ID NO.
ORBITER
OFF
MOVING TIMER
Shortens the time interval.
INVERSE
WHITE
MAIN MENU
PICTURE
SOUND
DISPLAY
FUNCTION
OTHER
SEL. ENT ENT. RTN END
Set to OFF.
Information is not displayed
when switching inputs and
changing signals.
OFF 30MIN 60MIN
120MIN 90MIN
DEUTSCH ITALIANO
ESPANOL FRANCAIS
1 2 3 4
7 6 5
ON
Extends the time interval.
OFF ON 60MIN
OTHER MENU
ENTER AUTO DISPLAY : ON
OFF TIMER : OFF
LANGUAGE : ENGLISH
ID NO. : 1
ORBITER : OFF
MOVING TIMER : 10MINITE
INVERSE : OFF
WHITE : OFF
SEL. ADJ. RTN BACK
Setup hint
Set to OFF when the display is not needed when switching signals.
This function automatically sets the power to standby status when
the indicated time period has elapsed.
ENGLISH is the factory setting.
Assigns ID nos. to the monitors so that they can be controlled
individually (up to 7 monitors can be controlled).
Automatically moves the images to prevent image retention. The
moving interval is set with the MOVING TIMER (1 - 60 min.).
Normally, set to the OFF mode. When 60 min. is set, the power will
be set to standby status after 60 minutes have elapsed and the
setting will be canceled. When a still image is displayed for an
extended time, ON is then set and the same still image is again
displayed, panel image retention is prevented with [INVERSE] ON or
[WHITE] ON. Does not operate when there is no input signal.