Accessory Settings - Nokia 6100 - Cell Phone 725 KB User Manual

Select Ringing tone for incoming voice calls. To select ringing tones saved in the Gallery, select
gallery from the ringing tone list.
Select Ringing volume
vibrating alert does not work when the phone is connected to a charger, desktop stand, or a car kit.
Tip: If you receive a ringing tone via OTA or by downloading, you can save the ringing tone in
the Gallery.
Select Message alert tone
tones to set the phone to sound tones for example, when the battery is running out of power.
Select Alert for to set the phone to ring only upon calls from phone numbers that belong to a selected
caller group. Scroll to the caller group you want or

Accessory settings

Accessory settings menu is shown only if the phone is or has been connected to one of the following
accessories: headset HDB-4, handsfree unit CARK126, or mobile inductive loopset LPS-4.
Press Menu, and select
if the corresponding accessory is or has been connected to the phone.
• Select Default profile
connect the selected accessory. You can select another profile while the accessory is connected.
• Select Automatic answer
seconds. If the Incoming call alert
• Select Lights to set the lights permanently On. Select
after a keypress. The
and Vibrating alert for incoming voice calls and incoming messages. The
to set the alert tone for the incoming messages,
Settings and Accessory
to select the profile you want to be automatically activated when you
to set the phone to answer an incoming call automatically after five
is set to
Lights option is available only when
All calls and press Mark.
settings. You can select Headset,
Beep once or Off, automatic answer will not be in use.
Automatic
Handsfree
Copyright © 2003 Nokia. All rights reserved.
Keypad tones, or
Handsfree
to set the lights on for 15 seconds
is selected.
Open
Warning
or Loopset
81