Charging The Battery; Switching The Phone On And Off - Nokia 6100 - Cell Phone 725 KB User Manual

■

Charging the battery

1. Connect the lead from the charger to the socket on the
bottom of your phone.
2. Connect the charger to an AC wall socket.
The text Charging
switched on. If the battery is completely empty, it may
take a few minutes before the charging indicator appears
on the display or any calls can be made.
You can use the phone while the charger is connected.
The charging time depends on the charger and the battery used. For example, charging a BL-4C battery
with the ACP-12 charger takes up to one hour and 30 minutes in standby mode.
■

Switching the phone on and off

Press and hold the power key
Note that if the phone displays
properly inserted, or SIM card not
service provider. Your phone does not support 5 Volt SIM cards and the card may
need to be changed.
• If the phone asks for a PIN code, key in the PIN code (displayed as ****), and
press OK.
See also PIN code request
page 14.
is displayed briefly if the phone is
.
Insert SIM card
supported, contact your network operator or
in Security settings on page 82 and Access codes on
even though the SIM card is
Copyright © 2003 Nokia. All rights reserved.
27