Anykey Answer; Automatic Redial; Speed Dialling; Call Waiting - Nokia 6100 - Cell Phone 725 KB User Manual

Select the divert option you want, for example, select
number is busy or when you reject an incoming call.
To set the divert setting to on, select Activate, and then select the timeout after which the call is
diverted, if this is available for the divert option. To set the divert setting to off, select Cancel. To check
whether the call divert is activated or not, select
Several divert options may be active at the same time.
To see the divert indicators in standby mode, see Essential indicators on page 21.

Anykey answer

Press Menu, and select Settings,
an incoming call by briefly pressing any key, except

Automatic redial

Press Menu, and select Settings,
make a maximum of ten attempts to connect the call after an unsuccessful call attempt.

Speed dialling

Press Menu, and select Settings,
numbers assigned to the speed dialling keys, from
holding the corresponding number key.

Call waiting

Press Menu, and select Settings,
notify you of an incoming call while you have a call in progress (network service). See Call waiting on
page 34.
Divert if busy
Check
Call settings and then
Call settings and Automatic
Call settings and Speed
Call settings and Call
Copyright © 2003 Nokia. All rights reserved.
to divert the voice calls when your
status, if this is available for the divert option.
Anykey answer. Select
, selection keys and
redial. Select On
dialling. Select On and the names and phone
to , can be dialled by pressing and
waiting. Select Activate
On and you can answer
, and .
and your phone will
and the network will
75