Time format
and
•
to use the 12-hour or 24-hour clock system and with
which symbol to separate hours and minutes.
Clock type
— Define the clock type.
•
Clock alarm tone
•
Alarm snooze time
•
alarm clock.
Workdays
— Define the days of the week that are work
•
days for you.
Automatic time update
•
time zone information automatically (network service).
Common accessory settings
Select
Menu
Ctrl. panel
>
Enhancement.
With most accessories, you can do the following:
To define which profile is activated when you attach an
accessory to your device, select the accessory and
profile.
To set the device to answer phone calls automatically after
5 seconds when an accessory is attached, select
Automatic answer
Beep once
or
Silent
answering is disabled.
To illuminate the device while it is attached to an
accessory, select
Lights
Turn to silence calls or alarms
When you activate the sensors in your device, you can
96
control certain functions by turning the device.
Time separator
— Select whether
— Select the tone for the alarm clock.
— Define the snooze time for the
— Update the time, date, and
Settings
and
General
>
> On. If the ringing type is set to
in the selected profile, automatic
> On.
Select
Menu
Sensor
settings.
Select from the following:
Display rotation
•
automatically according to the device's orientation.
Turning control
•
calls or snooze alarms when you turn the device face
down.
Security settings
About security settings
Select
Menu
Security.
>
Avoid using codes that are similar to emergency numbers
to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
Default
Device and SIM card security
To change the PIN code, select
PIN
code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised use
and is provided with the SIM card. After three consecutive
incorrect PIN code entries, the code is blocked, and you
need to use the PUK code to unblock it before you can use
the SIM card again.
To set the keypad to lock automatically after a defined
period, select
period.
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is
Ctrl. panel
Settings
>
>
— Set the display to rotate
— Set the device to silence incoming
Ctrl. panel
Settings
>
>
Phone and SIM card
Phone and SIM card
>
and
General
>
and
General
>
>
Keypad autolock