Gprs; Gprs Connection; Gprs Modem Settings - Nokia 6100 - Cell Phone 725 KB User Manual

• When blinks, your phone is trying to connect to the other device or a connection has been lost.

GPRS

GPRS connection

You can set the phone to automatically register to a GPRS network when you switch the phone on.
Press Menu, and select Connectivity, GPRS,
dial-up application, or sending/receiving multimedia messages creates the connection between phone
and network and data transfer is possible. When you end the application, GPRS connection is ended
but the registration to the GPRS network remains.
If you select When needed, the GPRS connection is established when an application needs it and closed
when you end the application.

GPRS modem settings

You can connect the phone via infrared or data cable connection to a compatible PC and use the phone
as a modem to enable GPRS connectivity from the PC.
Press Menu, and select Connectivity,
activate the access point you want to use. Select
settings.
• Scroll to Alias for access point
access point and press OK.
• Scroll to GPRS access point
An access point name is needed to establish a connection to a GPRS network. You can obtain the
Access Point Name from your network operator or service provider.
GPRS connection
GPRS and GPRS modem
Edit active access point
and press Select. Key in the name you would like for the activated
and press Select. Key in the Access Point Name (APN) and press OK.
Copyright © 2003 Nokia. All rights reserved.
and Always online. Starting a WAP or PC
settings. Select Active access point
to change the access point
and
101