AVG 8.5 INTERNET SECURITY NETWORK EDITION - V 85.2 User Manual page 231

Full path to the database file. Default value is avgdb.fdb - i.e. the database
file stored by default in the /opt/avg/avgadmsrv/var/db directory. The remote
Firebird Server and database file can be specified with the following string:
[remote_host:]database_path
Username, Password
·
Username and password that the stations will have to use in order to access
DataCenter. If these values are empty, authentication is not required. If the
values are set, stations are obliged to use them. No authentication is required
by default. We recommend to change the default values if you decide to use
these parameters!
DBAUsername, DBAPassword
·
Username and password for accessing the database engine itself.
LocalHttpServerRoot
·
If set, the GET command support is active. This path defines the local
directory where update files are stored. Only files in this directory are made
available using the GET command. By default, this is set to empty string and
the GET command support is not available.
HttpServerRoot
·
This option defines path that the stations should use for requesting the update
files. If empty, rootdirectory is used. This path points in HTTP request to the
local directory defined by the LocalHttpServerRoot option.
HttpLogPath
·
By default the server does not log HTTP requests. If this option is used then
all HTTP GET requests are logged in the "Apache Server Combined log file
format" into the specified file.
EnableUpdateProxy
·
Set to 1 (default) to enable AVG update files downloading and sharing in local
network.
Proxy
·
Specified server is used for proxy connection. The acceptable form is:
AVG 8.5 Internet Security Network Edition © 2009 Copyright AVG Technologies CZ, s.r.o. All rights reserved.
231