Information Panel; Synchronization Process; Station Settings Synchronization - AVG 8.5 INTERNET SECURITY NETWORK EDITION - V 85.2 User Manual

Stations
·
Scan results
·
Graphic reports
·
The Filter panel is located by default in the bottom left part of the screen. If the
panel is not visible, you can activate it by clicking on the Filter window item in
the View/Panels menu.

6.2.7. Information panel

In this part of the AVG Admin Console main window you can find information
about the current version of the virus base and AVG.
The Information Window panel is located by default in the right of the screen. If
the panel is not visible, you can activate it by clicking on the Information
window item in the View/Panels menu.

6.3. Synchronization Process

Stations managed by AVG Remote Administration periodically perform
synchronization with the AVG DataCenter. The process includes synchronization
of:
Station settings
·
Scan results
·
Station components states
·
You may also need to review the
information on connection requirements needed for successful synchronization.

6.3.1. Station Settings Synchronization

During the synchronization of station settings:
mandatory settings are transferred from the DataCenter to the station,
·
non-mandatory settings are transferred from the Station to the DataCenter.
·
The synchronization is performed periodically. By default, the settings
synchronization process is done every 60 minutes. To alter the synchronization
AVG 8.5 Internet Security Network Edition © 2009 Copyright AVG Technologies CZ, s.r.o. All rights reserved.
Network Requirements chapter for more
114