Tandberg Director Version; Nds Videoguard Bskyb Version; Dvb Ci Version; Tt1220 Control Modes - TANDBERG TT1220 Instruction Manual

•
EBU BISS
Further CA systems are available on the specific models:

TANDBERG Director Version

•
TANDBERG Director CA

NDS Videoguard BSkyB Version

•
NDS Videoguard BSkyB CA

DVB CI Version

•
Any DVB compliant CA system, utilising a DVB compliant common
interface CA module
1.3

TT1220 Control Modes

1.3.1

Introduction

The TT1220 is designed for unattended operation. Once set up, it requires
no further attention except to ensure that the fan is working. There are
three control modes associated with the receiver, local (keypad), remote
(RS-232), and over the air control (OAC)
1.3.2

Remote Control

This state is entered when the Ctrl. Mode setting in the Adv:System
Options menu is set to remote. When the Decoder is remotely controlled,
local control is disabled until the Decoder is configured for the local mode.
1.3.3

Over the Air Control

This state is entered when the Ctrl. Mode setting in the Adv:System
Options menu is set to OAC. When the Decoder is remotely controlled,
local control is disabled until the Decoder is configured for the local mode.
1.3.4

Local Control

Local control allows parameters to be entered and chosen using the four
keypad buttons.
The buttons roles and functions change, depending on what kind of menu
or screen is available at the moment.
The Up/Down buttons are used for previous/next item in a menu,
previous/next option in an option select menu (for instance, on or off) or
the higher/lower digit in a numerical entry menu.
The Right/Left buttons are used to enter/leave a menu or submenu, and
to select the next or previous digit in a numerical entry menu.
5
BISS is implemented according to Tech 3290 March 2000 and BISS-E is implemented according to Tech 3292 April
2001.
6
For a list of currently tested and supported common interface modules, please contact your sales representative or
the TANDBERG Television Help Desk.
7
OAC is a feature for TANDBERG Director only
Instruction Manual: TT1220 Professional Receivers and Decoders
ST.TM.TT1220.4
5
(mode 0 and mode 1)
6
.
7
.
Introduction
Page 1-7