Operating The Dryer - Kenmore 8885 - Rear Control 7.3 cu. Ft. Capacity Electric Dryer Use & Installation Instructions Manual

OPERATING THE DRYER
O SORT LAUNDRYAND LOAD DRYER
Refer to page 20.
_t CHECK THE LINT FILTER
Refer to page 20.
Power
O TURN ON DRYER
Press the Power button to turn on the dryer. The
lights around the Cycle Selector Knob will illuminate.
Refer to page 17.
\\
,\
SELECT CYCLE
Turn the Cycle Selector Knob to the desired cycle.
The display will show the preset Dry Level,
Temperature, Time, and Option settings for that cycle.
Manual Dry cycles also allow you to select a Timed
Dry setting. Refer to page 17.
SELECT CYCLE MODIFIERS
Dry Level, Temp Control, Timed Dry and Cycle Signal
Refer to page 22.
OPTIONS
@ @
SELECT CYCLE OPTIONS
More Time, Less Time, Damp Dry Signal,
Wrinkle Guard, My Cycle and Rack Dry
Refer to page 23.
_i_ BEGIN CYCLE
Press the Cycle Selector Knob to begin the cycle.
Pressing the Cycle Selector Knob after the dryer is
running will Pause the dryer and retain the existing
setting up to 4 minutes. Refer to page 17.
When the load is finished, the Cycle Signal (if set) will
sound. If you have set the Wrinkle Guard option,
the dryer will tumble the load periodically for up to
3 hours. Refer to page 23 for Wrinkle Guard details.
Remove items from the dryer immediately after
the end of the cycle to prevent further wrinkling.
Checking and cleaning the lint screen after every
load is essential for dryer performance and preventing
lint buildup and/or vent blockage.
18