Download  Print this page

Kenmore C82072 Operating Instructions

Hide thumbs
   

Advertisement

Quick Links

Before Operating Your Dryer

Read your dryer Use and Care Guide. It has
important safety and warranty information. It also
has many suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Use and
Care Guide before operating this appliance.

Operating Steps

Read Drying Procedures in your Use and Care
Guide. It explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
Printed in U.S.A.

OPERATING INSTRUCTIONS

5. Set Temperature and Wrinkle-Rid/Signal
Options controls as desired.
6. Turn cycle selector clockwise to desired
setting.
7. Start dryer. Turn the Turn to Start control
clockwise to ON. Hold for 1-2 seconds and
release.
8. When Signal Option control is on, a signal
will sound near the end of the cycle. When
Wrinkle Rid/Signal Option is selected, a signal
will sound every 5 minutes as a reminder to
remove the load during WRINKLE RID.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
C82072/C82074
To avoid fire hazard, do not use
heat to dry items containing feathers or down, foam
rubber, plastics, or similarly textured, rubber-like
materials. Use the Air Fluff-No Heat cycle only.
Select the temperature setting most suitable for
each load. The REGULAR--HIGH HEAT, PERM
PRESS--MEDIUM HEAT, KNITS--MEDIUM-LOW
HEAT and DELICATES--LOW HEAT temperature
settings may be used with any cycle setting.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
The Automatic Dry and Timed Dry cycles end with
a cool down period. The heat automatically turns
off and the load continues to tumble during the cool
down period. This reduces wrinkling and makes
items easier to handle during unloading.
Drying time varies depending on size and
dampness of load, weight and fabric type. Room
temperature and humidity, type of installation and
electrical voltage or gas pressure can also affect
drying time.
P/N 134152900 (0207)

Advertisement

loading

  Summary of Contents for Kenmore C82072

  • Page 1: Operating Instructions

    OPERATING INSTRUCTIONS C82072/C82074 5. Set Temperature and Wrinkle-Rid/Signal To avoid fire hazard, do not use Before Operating Your Dryer Options controls as desired. heat to dry items containing feathers or down, foam rubber, plastics, or similarly textured, rubber-like Read your dryer Use and Care Guide. It has 6.
  • Page 2: Energy Saving Tips

    Cycle Selection • DAMP DRY - This setting is best for items you Timed Dry Cycle (continued) wish to partially dry before hanging or ironing. This cycle provides up to 80 minutes of drying time Select the temperature setting most suitable for at the temperature selection of your choice.
  • Page 3: Tapes De Fonctionnement

    C82072/C82074 NOTICE DE FONCTIONNEMENT Avant d’utiliser la sécheuse Sélectionnez le réglage de température le plus 6 . Tourner le sélecteur de cycle dans le sens des Lire le Guide de l’utilisateur qui accompagne la aiguilles d’une montre jusqu’au cycle désiré.
  • Page 4 Choix des cycles une plus courte durée de séchage, réglez le Cycle Timed Dry (Cycle de séchage (suite) sélecteur de cycle à droite du repère. chronométré) Cycle Automatic Dry (Séchage Ce cycle fournit 80 minutes de séchage à la température DAMP DRY (Séchage humide) - Ce réglage est optimal sélectionnée.

This manual is also suitable for:

C82074