Chapter 3 Advanced Configurations Via Telnet; Help] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 112 & 502 Manual

Ip-based telephone system

Table of Contents

LAN Phone 101 User Manual Guide

Note: When key in IP address in Pbook table, please do not add 0 before IP

Chapter 3 Advanced Configurations via Telnet

After initializing the LAN Phone 101 IP Address setting (please refer to LCD Configuration:

1.Connect Configuration), user can enter into configuration mode via telnet. There are 18

commands listed below.

Note:

1.After user enter LAN Phone configuration via telnet, please use login : "root",

password : "press enter" to enter command line.

2.Each command user must key-in with lower case, but contents of configurations such as

h.323 alias or user name etc, user can set as capital case.

3.User who changes any configuration needs to do the commit command then reboot

command.

Type help or man or ? to display all the command lists. The following figure is shown all

commands of LAN Phone 101.

address (ex.10.1.1.1 please do not key in 010.001.001.001).

LAN Phone Ver. 112/502(Normal and PPPoE)

Document Ver. 1.7

Table of Contents

Lan phone 101