Pbook] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 112 & 502 Manual

LAN Phone 101 User Manual Guide

9. [pbook] command

The command is for Peer-to-Peer Mode use only. Therefore, Welltech VoIP products such as
LAN Phone 101 that support Peer-to-Peer Mode are also available to be addressed on the LAN
Phone 101 phone book.
1.-print: display phone book data. User can print all data in phone book by command
(pbook –print). Furthermore, user can also print only a section of data by indicate
parameter 'start_record' and 'end_record' (pbook –print "start prefix" "end prefix"). If
parameter 'end_record' is omitted, only record 'start_record' will be display (pbook –print
"start prefix").
2.-add: add a new record in phone book table by give a name and e164 number for the
Gateway / Terminal IP address .
(pbook –add name "X" ip "xxx.xxx.xxx.xxx" e164 "X")
3. -search: search any record such as ip address, name and e164 addressed on the phone book.
4. -delete: delete a record with index listed in phone book table. (pbook –delete "index
number")
5. -insert: insert an record in specified index of phone book.
6. -modify: modify any record that has addressed to index number. The name, IP address and
e164 number should be modified together in one modify command.
(pbook –modify "index" name "X" ip "xxx.xxx.xxx.xxx" e164 "X")
Note: Please dial "#" after dial e.164 of pbook .
Copyright (c) 2002 WellTech Computer Corporation
21
LAN Phone Ver. 112/502(Normal and PPPoE)
Document Ver. 1.7