Time] Command; Ping] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 112 & 502 Manual

LAN Phone 101 User Manual Guide

7. [time] command

When sntp server is established as well as the sntp function of LAN Phone 101 is enabled, type
time command should show the current time what is retrieved from the assigned sntp server.
Note: Please refer to the Chapter 4.6 [ifaddr] command to configure sntp server..

8. [ping] command

Command ping can test which the IP address is reachable or not.
Usage: ping "xxx.xxx.xxx.xxx(IP address)"
The message will display packets transmitting condition or no answer from the IP address.
Copyright (c) 2002 WellTech Computer Corporation
20
LAN Phone Ver. 112/502(Normal and PPPoE)
Document Ver. 1.7