Table of Contents
Advertisement
LAN Phone 101/201 User Manual Guide
Chapter 5 Upgrade the LAN Phone 101/201
LAN Phone 101/201 supports two methods to upgrade the new version. Both methods are necessary
to prepare the TFTP program on the host PC as TFTP server. After installing TFTP program on
one PC and connecting to network, LAN Phone 101/201 is ready to be upgraded.
1. LCD Panel Control
2. Remote Control: Telnet
3. Web Management
＊Download Procedure
1.LCD Panel Control
1.Choose the 1→3 selection-Firmware Upgrade. Press OK to enter into the sub-selection
as below.
2.Download method
There are two methods to download new rom file, please move the "~" symbol by
press or on the keypad to select TFTP or FTP method, then press OK to
confirm it.
3.Set File Server IP
User has to offer one TFTP/FTP server IP Address and set this IP Address on the
LAN Phone keypad. The IP address is necessary for upgrading LAN Phone new
application rom file.
4.Set FTP user account
User has to press user name and password for FTP server login .It is necessary for
upgrading Lan Phone new application rom file in FTP method.
5.Indicate file name
User has to press the file name of new application rom file prepared for upgrading
6.Start Download
Press OK to start download new application rom file .
7.Firmware Version
Show versions of all rom files.
Note: Download via LCD command can only upgrade new application rom
file.
55
Document Ver.: 2.0
LAN Phone Ver:lp2.100.
Hide quick links:
Advertisement
Table of Contents
