1. Manuals
  2. Brands
  3. WELLTECH Manuals
  4. IP Phone
  5. WellPhone-305
  6. Administration manual

WELLTECH WellPhone-305 Administration Manual

Hide thumbs Also See for WellPhone-305:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
L
A
N
P
h
o
n
e
3
0
5
S
I
P
L
A
N
P
h
o
n
e
3
0
5
S
I
P
A
d
m
i
n
i
s
t
r
a
t
i
o
n
G
u
i
d
e
A
d
m
i
n
i
s
t
r
a
t
i
o
n
G
u
i
d
e

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WellPhone-305 and is the answer not in the manual?

Questions and answers

Related Manuals for WELLTECH WellPhone-305

Summary of Contents for WELLTECH WellPhone-305

  • Page 2: Table Of Contents

    CHAPTER 1 OVERVIEW OF THE SIP-PHONE ..............5 1. H ....................6 ARDWARE VERVIEW 1.Front View and Keypad function ................6 2.Back View ........................ 12 3.Specification of connector..................12 2. S ..............13 OFTWARE EATURES AND PECIFICATION 3. P & E ..............
  • Page 3 (1) Activate ......................23 (2) Deactivate ...................... 23 2.3.4.3 Unconditional ....................23 (1) Activate ......................23 (2) Deactivate ...................... 23 2.3.5 Do Not Disturb ....................24 2.3.6 Network ......................24 2.3.6.1 Information ....................24 2.3.6.2 Network Mode ..................... 25 2.3.6.3 IP address ....................25 2.3.6.4 Subnet Mask: ....................
  • Page 4 CHAPTER 3 CONFIGURING THE SIP-PHONE THROUGH WEB PAGES...... 35 1. B IP A ..........36 ROWSE THE DDRESS PREDEFINED VIA EYPAD 2. I ..............37 NPUT THE LOGIN NAME AND PASSWORD 3. E .............. 38 NTER THE WEB INTERFACE MAIN SCREEN 4.
  • Page 5 Reversion History Version Date Software Version Description 305_SIP_1.0 2005/04 First version. 305_SIP_1.1 2005/07 Modify multi-line configuration. 305_SIP_1.2 2005/7/12 Remove Blind transfer button and modify transfer scenario. 305_SIP_1.3 2005/7/13 Modify Command line and web interface according to meeting conclusion of product unification. 305_SIP_1.4 2005/8/26 Modify sip command...

  • Page 6: Chapter 1 Overview Of The Sip-Phone

    Chapter 1 Overview of the SIP-Phone SIP-Phone is a full-featured IP-based telephone set via Ethernet base communication. Over the office LAN connection, it provides IP-PBX solution such as station-to-station call, IP call and local PSTN/PBX Extension call via PSTN Gateway. SIP-Phone provides two 10/100BaseT switch/hub RJ-45 ports allow connecting to office LAN and PC simultaneously.

  • Page 7: Hardware Overview

    1. Hardware Overview 1.Front View and Keypad function ♦ LCD: 2 l s, 2 4 character Dot M atrix display. ♦ C: Jump out current LCD menu to upper level. ♦ : Mov revious/left and clear input data. ♦ : Mov ext /right.
  • Page 8 ♦ Number 1 –10, * and #: The function is the same as the general phone set. Corresponding list of keypad and symbol: (1) Character mode: “1” “a” ; “ b” ; “c” ; “2” “d” ; “e” ; “f” ; “3” “g”...
  • Page 9 number/ address according to phone book data. Switch input mode between character mode or digit mode, e.g., when user wants to input phone number can press SPEED to sw itch input mode as digit mode; when user wants to input name can also press SPEED to switch input mode as character mode.
  • Page 10 git timed out to dial out) → C rings → C immediately, or A will wait for inter di picks up → A talk with C → C reject to talk with B → A press TRAN again, C will be disconnected → A retrieve communication with B 3.
  • Page 11 Conference Scenario in dif ferent circumstance: . Normal Mode: n with B → A press CONF → B hear hold tone → A A in Communicatio hear dial tone → A press Number of C (If press # at the end of number, A will dial out immediately, or A will wait for inter digit timed out to dial out) →...
  • Page 12 out) → B hangs will dial out immediately, or A will wait for inter digit timed up → A hear busy tone, call is disconnected → C stop ringing 7. A quit Conference: A in Communication with B → A press CONF → B hear hold tone → A hear dial tone →...

  • Page 13: Back View

    2.Back View ♦ DC 9V: DC 9V power input outlet ♦ LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5 cable. PoE 802.3af compliant. (For Special version only) ♦ PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable ♦...

  • Page 14: Software Features And Specification

    2. Software Features and Specification Application: ISP/ITSP (Internet Telephony Service Provider) IP-PBX with office telephony services Multi-nation enterprise communication SOHO Telephony Calling Features Call Hold Call Transfer Call Forward Call Waiting Call Conference 10 sets last number Redial Five configurable speed dials 5 Multi-lines Network Supported Fixed IP...

  • Page 15: Physical Specification & Environment

    Provisioning and Configuration SIP (RFC3261) compliance LCD configuration password protection Provide Proxy Mode or Peer-to-Peer Mode (Non Proxy Server needed) selection Ring tone, Speaker and Handset volume adjustable Support DNS server inquiry Management Features: Software Upgrade: TFTP/FTP download Three easy ways for system configuration LCD Front Panel Web Browser TELNET...

  • Page 16: Chapter 2 Configuring The Sip-Phone Through Lcd Phone Menu

    Chapter 2 Configuring the SIP-Phone through LCD Phone menu Note: 1. After any configuration is made for the SIP-Phone, user has to do Reboot in the selection 7 “Reboot”. 2. We suggest user to set IP address via LCD menu 5→2.3.4.5 first, then go to chapter 3 to do other detail configurations via web browser.
  • Page 17 2.1.3 Then SIP-Phone get into standby mode: S I P - P H O N E P R O X Y 1 0 : 1 0 : 1 0 A M The main LCD screen would be shown as similar as above. “PROXY” means the SIP-Phone is in Proxy Mode, and when SIP-Phone is connected to SNTP server, on LCD will show current time captured from SNTP server.

  • Page 18: Lcd Display

    2.2 LCD Display 2.2.1 Standby Mode 2.2.2.1 Proxy Mode S I P - P H O N E P r o x y 1 0 : 1 0 : 1 0 2.2.2.2 Peer-to-Peer Mode S I P - P H O N E P 2 P 1 0 : 1 0 : 1 0 2.2.2 Dialing Mode...

  • Page 19: Transfer In Communication

    2.2.7 Transfer In Communication When number is longer than LCD length, number will slide to left. E n t e r T r a n s f e r N u m b e r : 2.2.8 Conference In Communication When number is longer than LCD length, number will slide to left.

  • Page 20: Call List

    Press can enter LCD menu list as below: > 1 . C a l l L i s t 2 . P h o n e B o o k 3 . R i n g e r S e t t i n g s 4 .

  • Page 21: Phone Book

    > 1 . 8 2 3 4 5 8 7 8 0 6 / 0 1 2 0 : 1 0 2 . 6 7 5 4 3 2 1 5 0 6 / 0 1 1 8 : 2 5 2.3.1.3 Dialed Numbers: to see all dialed calls in message box.

  • Page 22: New

    > 1 . T o m C r u i s e 0 2 8 2 1 3 8 7 5 6 2 . N i c o l e K i d m a n 8 8 6 2 8 7 6 5 4 3 2 1 After select phone book data: P h o n e B o o k...

  • Page 23: Ringer Setting

    P l e a s e e n t e r I n s e r t N o . : 2.3.3 Ringer Setting User can adjust ring volume by press on the keypad to decrease or increase ringer volume, at the mean time ringer will be played according to volume adjustment.

  • Page 24: Activate

    call will be forwarded to the assigned phone number. > 1 . A c t i v a t e 2 . D e a c t i v a t e (1) Activate Enter a forwarded phone number to activate no response forward function.

  • Page 25: Do Not Disturb

    2.3.5 Do Not Disturb If user enables this function, SIP-Phone can no longer accept incoming calls. N o t D i s t u r b F u n c t i o n : > E n a b l e d D i s a b l e d 2.3.6 Network >...

  • Page 26: Network Mode

    2.3.6.2 Network Mode Set network mode of SIP-Phone to be Static (Fixed IP), DHCP, or PPPoE. S e l e c t N e t w o r k M o d e : > S t a t i c D H C P P P P o E 2.3.6.3 IP address...

  • Page 27: Sntp Configuration

    (2) Password Set PPPoE connection authentication password. E n t e r P a s s w o r d : * * * * * (3) Auto-Retry Choose ON or OFF to enable or disable this function. If user enables this function, after PPPoE disconnected, SIP-Phone will automatically reboot to re-connect, and after reboot, if SIP-Phone still can’t connect with server, SIP-Phone will keep trying to connect.

  • Page 28: Behind Ip-Sharing

    S e l e c t T i m e Z o n e < - - > G M T + 8 : 0 0 2.3.6.9 Behind IP-Sharing If SIP-Phone is behind IP sharing or NAT device, on IP sharing must enable “DMZ”...

  • Page 29: Advanced Settings (Protected By Password)

    2.3.7 Advanced Settings (protected by password) Please Enter Password: If LCD password has been set, user must key in password to enter this menu. Default is no password, user won’t see password request LCD as below. Sub-menus under this command are all important ones, which can only be configured by advanced users.

  • Page 30: Connect Mode

    Select SIP connection mode to be peer-to-peer mode or Proxy mode. S e l e c t S I P C o n n e c t M o d e : > P r o x y P 2 P (A) Proxy >...

  • Page 31: Registration Account

    S e c o n d a r y P r o x y P o r t : 5 0 6 0 (G) Outbound Proxy port Set outbound Proxy port for SIP-Phone to send messages. E n t e r O u t b o u n d P o r t : 5 0 6 0...

  • Page 32: Firmware Update

    E n t e r A c c o u n t P a s s w o r d : 2.3.7.2 Firmware Update > 1 . D o w n l o a d M e t h o d 2 .

  • Page 33: Ftp Account

    (4) FTP Account User has to input user name for FTP server login .It is necessary for upgrading SIP-Phone new application rom file via FTP method. E n t e r F T P U s e r N a m e : E n t e r F T P U s e r...

  • Page 34: Lan Port Vlan Id

    (3) LAN Port VLAN ID Input LAN port VLAN ID. E n t e r L A N P o r t V L A N I D : (4) WAN Port Priority Enter WAN port priority number. E n t e r W A N P o r t P r i o r i t y :...

  • Page 35: Lcd Menu Password

    2.3.7.4 LCD Menu Password Set entry password of phone LCD menu. E n t e r L C D M e n u P a s s w o r d : 2.3.8 Reboot Reboot machine. It is necessary and important for user to reboot SIP-Phone after any configurations has been made.

  • Page 36: Chapter 3 Configuring The Sip-Phone Through Web Pages

    Chapter 3 Configuring the SIP-Phone through Web Pages The HTTPD web management interface provides user an easier way to configure rather than command line method through TELNET. The configuration function and steps are similar with the way through command line. Please refer to the chapter 4-Configuring the SIP-Phone through Telnet command lines for more detail information.

  • Page 37: Step 1. Browse The Ip Address Predefined Via Keypad

    Step 1. Browse the IP Address predefined via Keypad Please enter IP address (user have to set via LCD menu first) of SIP-Phone in web browser. If user failed to set IP address via LCD menu, the default IP address of SIP-Phone is 10.1.1.3, user can try to connect to SIP-Phone via this default IP via web interface.

  • Page 38: Step 2. Input The Login Name And Password

    Step 2. Input the login name and password Login name: root / user Note: Login with “user” only has authority as below: 1. Modify network configuration 2. Modify Phone Book 3. Change login password of “user” 4. Reboot Password (The same with TELNET): Null (just press confirm, no need to key in password in default value) Note: User can set password later via web interface.

  • Page 39: Step 3. Enter The Web Interface Main Screen

    Step 3. Enter the web interface main screen After enter login name and password, user can see web interface main screen as below. Step 4. Start to configure After enter web management interface, user can see 4 main items. 1. Installation Wizard: User can follow steps in wizard to make first-time initial configuration.

  • Page 40: Installation Wizard

    1. Installation Wizard Installation Wizard includes 3 steps: SIP SIP-Phone Administration Guide...
  • Page 41 (A) Network Connection Mode: User has to select SIP-Phone network mode as Static IP, DHCP or PPPoE. SIP SIP-Phone Administration Guide...
  • Page 42 (B) Network Configuration: After selecting network connection mode, user has to input related network parameters. (1) Static IP: User has to input IP, subnet mask, default gateway, and DNS server address. SIP SIP-Phone Administration Guide...
  • Page 43 (2) PPPoE: User has to input PPPoE connection user name and password. SIP SIP-Phone Administration Guide...
  • Page 44 (C) Protocol Configuration: After setting network, user has to set SIP related parameters according to different lines. Operation Mode: User has to select SIP-Phone to work as Proxy mode or Peer-to-Peer mode. Primary Proxy Address and port: If user select Proxy mode in item A, please input Primary Proxy address and signaling port of Proxy.

  • Page 45: Advanced Configuration

    2. Advanced Configuration (A) Network Configuration (1) Network Configuration Network Connection Mode: User has select network configuration mode first, then configuration page will display related items. (a) Static IP: If user selects Static IP mode, following items will be displayed. IP Address: Set IP Address of SIP-Phone Subnet Mask:...
  • Page 46 (b) DHCP: If user selects DHCP mode, following items will be displayed. DNS Server Obtained Mode: When SIP-Phone is in DHCP or PPPoE mode, user can determine DNS address is obtained from server or set manually. Primary DNS Server: If user determines to set DNS address manually, please set Primary Domain Name Server IP address here.
  • Page 47 (c) PPPoE: If user selects PPPoE mode, following items will be displayed. DNS Server Obtained Mode: When SIP-Phone is in DHCP or PPPoE mode, user can determine DNS address is obtained from server or set manually. Primary DNS Server: If user determines to set DNS address manually, please set Primary Domain Name Server IP address here.
  • Page 48 SIP SIP-Phone Administration Guide...
  • Page 49 (2) Behind NAT Behind IP Sharing: Select if enable SIP-Phone behind IP Sharing router function. IP Sharing Public IP Address: Set Public IP Address of IP Sharing router for SIP-Phone to work behind IP sharing. Enable STUN Function: Enable or Disable STUN function. STUN Server Address: Set STUN server address.
  • Page 50 (3) SNTP SNTP Mode: Enable / Disable the Simple Network Time Protocol function SNTP Server Address: Set SNTP Server Address. When SNTP server is available, enable SIP-Phone SNTP function to point to SNTP server IP address so that SIP-Phone can get correct current time. Time Zone-GMT: Set time zone for SNTP Server time.
  • Page 51 (4) DDNS DDNS Mode: to enable/disable DDNS function DDNS Server: to choose one DDNS server, on which user has already registered. (Now only one DDNS server is available---www.dyndns.org) Host Domain Name: to set the registered Domain Name of SIP Phone DDNS Server Login User ID: to set login ID of registered account to log in DDNS server...
  • Page 52 SIP SIP-Phone Administration Guide...

  • Page 53: (B) Sip Configuration

    (B) SIP Configuration (1) SIP Main Configuration-Settings for each line Operation Mode: User has to select SIP-Phone to work as Proxy mode or Peer-to-Peer mode. Primary Proxy Address and port: If user select Proxy mode in item A, please input Primary Proxy address and signaling port of Proxy.
  • Page 54 (2) SIP Advanced Configuration Display Name: set SIP-Phone display name for caller ID information. Prefix String: set prefix string. If user ID contains alphabets, user can set it as prefix string here. For example, if Account Name is 123, SIP-Phone will sent out messages as Account Name @”IP address of Proxy”, if user set prefix as abc, SIP-Phone will set out as abc123@”IP address of Proxy”.

  • Page 55: (C) System Configuration

    (C) System Configuration (1) Feature Configuration Inter Digit Time: Set the DTMF inter digit time (second) To set the duration (in second) of two pressed digits in dial mode as timed out. If after the duration user hasn’t pressed next number, SIP-Phone will dial out all number pressed.

  • Page 56: (D) Number Configuration

    (D) Number Configuration (1) Phone Book Add Data: User can specify 50 sets of phone book via web interface. Please input index, Name, E.164 number, IP Address, port of the destination device, drop prefix, and insert number. name: Specify name for one pbook data IP : Set IP address of callee.
  • Page 57 (2) Hotline If user set SIP-Phone as hotline mode, once SIP-phone is off-hook, it will automatically dials out IP address (Peer-to-Peer Mode) or phone number (Proxy Mode) set in hotline table. SIP SIP-Phone Administration Guide...
  • Page 58 (3) Digit Manipulation add: Add a rule to drop or insert prefix digits of incoming call. prefix: Set which prefix number to implement digit manipulation rule. drop: Enable or disable drop function. If this function is enabled, Sip-Phone will drop prefix number on incoming call. insert: Set which digit to insert.

  • Page 59: (E) Media Configuration

    (E) Media Configuration (1) Co Codec Priority: set codecs priority in ord er. Please notice that user can set from 1 to 5 codecs as their need. For examp le, user can only set first priority as G.723.1, and set the other s as x, that means only G.723.1 is available.
  • Page 60 (2) Voice Volume: Adjust the volume of Ringer, Receive (Local side hearing), transmit (remote side hearing), DTMF. Echo Cancelor: Enable / Disable (it is suggested to always Enable this function). SIP SIP-Phone Administration Guide...
  • Page 61 (3) Tone Configuration Dial Tone: Set dial tone parameters. Busy Tone: Set busy tone parameters. Disconnect Tone: Set disconnect tone Parameters. Ring Back Tone: set ring back tone parameters. Ring Tone: Set ring tone parameters. SIP SIP-Phone Administration Guide...
  • Page 62 (4) Payload Type RFC2833 Payload Type: change RFC2833 Payload type. This is for special request from the other site, if RFC2833 payload types of 2 sites are different, it may cause some problem of connection. SIP SIP-Phone Administration Guide...

  • Page 63: (F) Device Management

    (F) Device Management (1) Login Password Change password configuration: First select login name as root or user, then enter current password, new password and confirm new password again to set new password. SIP SIP-Phone Administration Guide...
  • Page 64 (2) Software Upgrade Download Mode: Select download method as TFTP or FTP TFTP/FTP Server IP Address: Set TFTP server IP address FTP Login: Set FTP login name and password Target File name: Set file name prepared to upgrade Target File Type: Select which sector of SIP-Phone to upgrade Note: After upgrade Application, please remember to execute Flash Clean, which will clean...
  • Page 65 (3) Provision Server Provision Server Address: set Provision server IP address. Provision Server Login User Name: set Provision Server login user Provision Server Login User Password: set Provision Server login user password. Provision Server Cycle Time: set Provision Server update cycle time.
  • Page 66 (4) Flash Clean Press CLEAN will clean all configurations except Network Configuration of SIP-Phone and reset to factory default value. Note: User must re-configure all commands all over again (except Network Configuration). SIP SIP-Phone Administration Guide...

  • Page 67: System Status

    3. System Status (1) A. Network Status: Display all current network status of SIP-Phone. SIP SIP-Phone Administration Guide...
  • Page 68 (2) Phone Status: Display current registration and operation status of each line. SIP SIP-Phone Administration Guide...
  • Page 69 (3) Version Information: Display software version. SIP SIP-Phone Administration Guide...
  • Page 70 4. Reboot Press reboot will reset SIP-Phone. Note: o execute reboot via web browser, SIP-Phone will automatically save all data before reboot. To execute reboot via TELNET command, please remember to do Commit Data before Reboot System. SIP SIP-Phone Administration Guide...

  • Page 71: Chapter 4 Configuring Through Telnet Command Lines

    Chapter 4 Configuring through Telnet command lines After setting the IP Address of SIP-Phone and reboot, (please refer to LCD Menu: 5-3.4.5), user can enter into Telnet command lines. Note: 1. After user enter SIP-Phone configuration via telnet, please use login: ”root”, password: null, press enter to enter command lines.

  • Page 72: Help ] Command

    1. [help] command Type help or man or ? to display all-command list. Command Description help help/man/? to show all command list quit quit/exit/close to exit command line management ifaddr Network information and configuration SIP related configuration pbook Phone book information and configuration sysconf System function configuration voice...
  • Page 73 -autodns Method to obtain DNS Server (0:Manual, 1:Auto) -sntp SNTP mode and specify server IP address -timezone Local time zone of system time -ipsharing Specify if VoIP is behind IP sharing and set public IP address -stun STUN function and server address (0:Disable, 1:Enable) -stunport STUN server port -http...
  • Page 74 Primary/Secondary Proxy Server, DDNS Server, DDNS check IP server, FTP server, TFTP server and Phone book…etc. 5. –autodns: Specify the way to obtain DNS Server. If user set this value as 0 that means no matter what network mode SIP-Phone is, user has to specify DNS server manually.

  • Page 75: Sip ] Command

    Note: Please notice that when user disable PPPoE Retry function, PPPoE Echo function will be not functional. 15. –pro: set Provision server IP address. 16. –proid: set Provision server login user ID. 17. –propwd: set Provision server login user password. 18.
  • Page 76 sip –print line2 sip –line1 px 10.1.1.2 number 1001 id 1001 pwd 1001 sip –pbsearch 1 1. –print linex: display all current configurations and specific line information. If user only inupt sip –print, screen will display first line information. 2. -mode: configure Line as Proxy or Peer-to-Peer Mode. 3.

  • Page 77: Pbook ] Command

    5. [pbook] command This command is functional both in Proxy mode and Peer-to-Peer mode. In proxy mode, use speed dial or 5 DL button will dial out e.164 number in phone book. In the other hand, in peer-to-peer mode, SIP-Phone will dial out IP address. Type pbook then following figure will be shown.

  • Page 78: Sysconf ] Command

    pbook –print. Furthermore, user can also print only a section of data by indicate parameter “start index” and “end index” (pbook –print “start index” “end index”). If parameter “end index” is omitted, only record “start index” will be displayed. (pbook –print “start prefix”). 2.

  • Page 79: Voice ] Command

    1. -print: display all current configurations. 2. -idtime: set the inter-digit timed out duration (in second) of two pressed digits. If the duration is timed out and user hasn’t pressed next number, SIP-Phone will dial out all number pressed. 3. -dtmf: set DTMF type. User can select DTMF type SIP-Phone receive and transmit. (sysconf –keypad 0/1/2, 0 for in band, 1 for RFC2833, 2 for SIP-Info.) 4.

  • Page 80: Ddns ] Command

    codecs. 3. -size: voice packet size can be configured as 20 ms, 40 ms or 60 ms. (only 30 and 60 ms for G.723.1) 4. -volume: There are four adjustable volume: voice, input, DTMF, and ring volume. Voice means the volume SIP-Phone receives; input means the volume SIP-Phone transmit;...
  • Page 81 ddns -server member.dyndns.org -hostname ipphone.dyndns.org ddns -update 30 m (30 minutes) ddns -update 12 h (12 hours) ddns -force 11.22.33.44 1. -print: display DDNS overall information and configuration. 2. –enable: to enable/disable DDNS function.(ddns –enable 0/1, 0 for disable and 1 for enable).

  • Page 82: Digit ] Command

    10. [digit] command Type digit then following figure will be shown. Digit drop/insert information and configuration Parameters: -print Display digit drop/insert information and configuration -add Add new data of digit manipulation -prefix Prefix of number which need to be handled drop Drop prefix (0:Disable, 1:Enable ) insert...

  • Page 83: Tos ] Command

    12. [tos] command Type tos then following figure will be shown. IP Packet Differentiated Service configuration Parameters: -rtptype DSCP type of RTP packet -sigtype DSCP type of SIP signaling Example: tos -rtptype 7 -sigtype 0 TOS/DiffServ (DS) priority function can discriminate the Differentiated Service Code Point (DSCP) of the DS field in the IP packet header, and map each Code Point to a corresponding egress traffic priority.
  • Page 84 DROP Precedence Class #1 Class #2 Class #3 Class #4 (AF11) (AF21) (AF31) (AF41) Low Drop Precedence 001010 010010 011010 100010 (AF12) (AF22) (AF32) (AF42) Medium Drop Precedence 001100 010100 011100 100100 High Drop Precedence (AF13) (AF23) (AF33) (AF43) 001110 010110 011110 100110...

  • Page 85: Vlan ] Command

    13. [vlan] command Type vlan then following figure will be shown. VLAN information and configuration Parameters: -print Display VLAN information and configuration -dev Enable/disable VLAN configuration. ( 0:Disable / 1:Enable.) -vid VID number.(1-4095, default:1) -lanvid PC port VID number.(1-4095, default:1) -priority Priority number.(0-3:Low priority, 4-7:High priority) -lanpriority...

  • Page 86: Time ] Command

    5. –priority: set CPU packets priority number.(From 0 to 7, 7 is the highest priority.) 6. –lanpriority : set pc port priority number. (From 0 to 7, 7 is the highest priority.) 7. –landroptag: enable/disable pc port drop tag function. If this function is enabled, SIP Phone will drop priority tag on packets sending out from PC port.

  • Page 87: Passwd ] Command

    -app Update main application code(optional) IP address of TFTP/FTP server File name -method Download method to be TFTP/FTP (0:TFTP, 1:FTP) -ftp Specify username and password for FTP Example: rom -method 1 rom -ftp vwusr vwusr rom -app -s 192.168.4.101 -f app.bin 1.

  • Page 88: Flash ] Command

    -set Set password of root or user -clean Clean current password configuration Example: passwd –set root rootpas passwd –set user userpas 1. –set: set password of “root” users or “user” users. (passwd –set root/user “password”) 2. –clean: clean up password restored before, and user can login :”root/user, password: ”press enter”.

  • Page 89: Debug ] Command

    21. [debug] command This command is for engineers to debug system of SIP-Phone. User can add debug flag via command debug –add “debug flags”, and then start debug function via command debug –open. When SIP-Phone is working on screen will display related debug messages.

Table of Contents