Ddns] Command - WELLTECH FXSO GATEWAY SIP 3701A Manual

LAN Phone 101/201 User Manual Guide

10.[ddns] command

This function is for Dynamic Domain Name Server service. Once user register to one DDNS
server, he can specify domain name for the LAN Phone. When LAN Phone reboot, it will
automatically update it's IP address to DDNS server. In this way, even LAN Phone is using
dynamic IP address, other endpoint can locate this LAN Phone by it's domain name.
1. -print: display DDNS overall information and configuration.
2. –enable: to enable/disable DDNS function.(ddns –enable 0/1, 0 for disable and 1 for
enable).
3. -server: to set IP address of DDNS login server.
4. -hostname: to set the registered Domain Name of LAN Phone. (ex. ddns –lp001.ddns.org)
5. –id: to set login ID of registered account to log in DDNS server.
6. –passwd: to set password of registered account to log in DDNS server.
7. –checkip: to enable/disable check IP function. If LAN Phone is behind IP sharing, when
this function is enabled, LAN Phone will check it's public IP address by asking IP address
check server and send to DDNS server to update DDNS data. If this function is disabled,
when LAN Phone is behind IP sharing, it will send it's private IP address to DDNS server.
8. -checkipsrv: to set IP address of IP address check server.
9. -delay: to set the update interval time. LAN Phone will re-update it's IP address in this time.
(ddns –delay 1-59m/1-24h , m means minute, h means hour)
10. –force: to force to execute DDNS update. Once user enter this command , LAN Phone will
update DDNS data immediately. (ddns –force "IP address of LAN Phone")
24
Document Ver.: 2.0
LAN Phone Ver:lp2.100.