Step 4. Start Configure; Network Interface - WELLTECH FXSO GATEWAY SIP 3701A Manual

LAN Phone 101/201 User Manual Guide

Step 4. Start configure

Most of all commands displayed in console / telnet are transfer to web interface. The most
important commands are
The method is as the same as command mode.

1.Network Interface

Please refer to chapter 3.6 [ifaddr] command.
- DHCP: Enable / Disable to DHCP mode
- IP Address:
- Subnet Mask:
- Default gateway:
- Domain Name Server:
- SNTP: Enable / Disable the Simple Network Time Protocol
- SNTP Server Address:
- GMT: Set time zone for SNTP Server time
- IP Sharing:
- IP Sharing Server Address:
one.
- Management Center IP Address:
Please be noted:
If the WAN IP Address of IP Sharing Server router is not a fixed one, it is not necessary to
input any values.
If behind the dynamic WAN IP Address situation please configure as GK mode and select
special Gatekeeper, please refer to your vendor.
Network Interface,
Set IP Address
Set the Subnet Mask
Set Default routing gateway
Set Domain Name Server IP address
Set SNTP Server Address
Enable it if behind IP Sharing router
Set WAN IP Address of IP Sharing Server router if it is a fixed
H323 Information,
Set Management Center Address
38
Document Ver.: 2.0
Commit Data and Reboot
LAN Phone Ver:lp2.100.
System.