Tos] Command - WELLTECH FXSO GATEWAY SIP 3701A Manual

LAN Phone 101/201 User Manual Guide
7.-mindelay:set minimum delay of jitter buffer(0~150)
8.-maxdealy:set maximum delay of jitter buffer(0~150)
Note: It is for advanced administrator use only. Please ask your distributor before
changing any settings of this command.

15. [tos] command

This command is for setting IP packet TOS values to determine IP Packets priority on network.
1. -print : display current TOS values configurations.
2. -rtptype : configure TOS type of RTP packets from 0 to 7
3. -rtcptype : configure TOS type of RTCP packets from 0 to 7
4. -rtpdelay : configure RTP packets as normal delay or low delay
5. -rtcpdelay : configure RTCP packets as normal delay or low delay
6. -rtpthruput : configure RTP packets as normal throughput or high throughput
7. -rtcpthruput : configure RTCP packets as normal throughput or high throughput
8. -rtpreliab : configure RTP packets as normal reliability or high reliability
9. -rtcpreliab : configure RTCP packets as normal reliability or high reliability
Note:
1. This command won't be functional until network environment can be capable
30
Document Ver.: 2.0
LAN Phone Ver:lp2.100.