1. Manuals
  2. Brands
  3. WELLTECH Manuals
  4. Gateway
  5. FXSO GATEWAY H.323 3701A - VERSION 2.1A
  6. Manual

WELLTECH FXSO GATEWAY H.323 3701A - VERSION 2.1A Manual

Fxso h.323 gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
F
X
S
O
F
X
S
O
U
s
e
U
s
e
(
3
7
(
3
7
G
A
T
E
G
A
T
E
r
M
a
n
r
M
a
n
0
1
A
/
0
2
0
1
A
/
0
2
W
A
Y
W
A
Y
u
a
l
u
a
l
A
)
A
)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FXSO GATEWAY H.323 3701A - VERSION 2.1A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for WELLTECH FXSO GATEWAY H.323 3701A - VERSION 2.1A

Summary of Contents for WELLTECH FXSO GATEWAY H.323 3701A - VERSION 2.1A

  • Page 2 Notice © Copyright 2002 Welltech Computer Co., Ltd. All intellectual property rights in this publication are owned by Welltech Computer Co., Ltd. and are protected by Republic of China copyright laws, other applicable copyright laws and international treaty provisions. Welltech Computer Co., Ltd. retains all rights not expressly granted.

  • Page 3: Table Of Contents

    3.6.2 Add a new Routing Table ................44 3.7 FXO P ....................47 ASSWORD 3.8 DDNS C ..................48 ONFIGURATION 3.9 U ...................49 PGRADE THE IRMWARE 3.10 V ................52 ERSION AND NFORMATION 4. COMMAND LIST ....................53 4.1 H .................53 YPER ERMINAL ETTING Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 4 4.2.14 [route] .......................72 4.2.15 [prefix] ......................74 4.2.16 [pbook]......................75 4.2.17 [voice] .......................77 4.2.18 [support] ....................80 4.2.19 [phone]......................82 4.2.20 [tone]......................84 4.2.21 [fxopwd]....................85 4.2.22 [record] .....................86 4.2.23 [tos]......................94 4.2.24 [ddns]......................95 4.2.25 [pt] ......................96 4.2.26 [rom] ......................97 4.2.27 [passwd]....................98 Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 5: Release Sep

    To explain the meaning of the command in the STEP 4 command line interface and example the usage of Command the command. List To get more usages or configuration in this step and study about the command line configuration. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 6: Start Up

    Network Trunk side Trunk side Extension Extension  FXO ports can connect with PSTN Line or Extension Line of PBX  FXS ports can connect with Phone Set or Trunk Line of PBX Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 7: Features And Specification

    G.168/165-compliant adaptive echo cancellation Dynamic Jitter Buffer Completed voice band signaling support Provide In-band or Out-band DTMF generation/detection Provide call progress tone Management Feature TELNET/Console port and Web Browser configuration Certification UL, CE, FCC FXS Features Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 8 Support auto-attendant (Tone or voice greeting) PSTN polarity reversal detection Provide 2 dial tone to PSTN Disconnect tone detection Asking ping function with the inside or outside calls Environmental Operation temp:0°C to 40°C Humidity: 10% to 90% (Non-condensing) Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 9: Accessories And Equipment

     The voice gateway in 2/4 FXS ports models and two RJ-45 connector (WAN and LAN).  The AC adapter.  The CD of user manual.  The connection cable in RS-232 interface. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 10: Appearance

    2. ACT- LED light on and flash when Ethernet data is being transmitted / received. LAN: Switch to another device, such as PC 1. Line- LED light on means Gateway is physically connected to the Ethernet Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 11 LAN/WAN: 10/100 Base-T; RJ-45 socket, complied with ETHERNET 10/100base-T. The pin-out is as following: PIN 1, 2: Transmit PIN 3, 6: Receive 2. COM: RS232 console port (DB-9pin male connector) Note: use straightforward cable to connect to your computer. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 12 RJ-11 connector, FXS interface is for connecting the analog phone sets or trunk line of PABX. 4. LINE: RJ-11 connector, FXO interface is for connecting the extension line of PABX or PSTN Line. 5. 12V DC: Input AC 100V~120V;output DC12V. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 13: How To Setup And Connect Basically

    2. One standard straightforward RS-232 cable (female connector to Gateway side). 3. Analog telephone sets. 4. PBX extension Lines or PSTN Lines. 5. Software tools (a) Hyper Terminal, TELNET, Web Browser. (b) Gatekeeper (optional). Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 14: Ip Environment Setting

    Turn on your computer and configure the network parameter as follow: Go to the start menu and enter the setting area. Click control panel. Enter the network configuration. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 15 Figure 2.1: Network Configuration Select the Property of the LAN card. Setup the ip address, subnet mask and default gateway as below: Figure 2.2: Configure the network Click OK after you finished the network setup. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 16: Network Configurations In Your Gateway

    The default ip address, netmask and default gateway address of the gateway is 10.1.1.3, 255.255.0.0, 10.1.1.254. 2.3 Network configurations in your gateway Key in the ip address of the gateway (http://10.1.1.3) with the browser Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 17 WEB configuration. (Username: root ; No password) Figure 2.3: Login the username and password You will enter the main page of the configuration after key in the login name and password correctly: Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 18: Static Ip Address

    Press the Network Interface to configure the networking of your gateway: Figure 2.5: The Network Interface 2.3.1 Static ip address Please get the correct ip address, netmask and default gateway address from your ISP first. Press the OK button if you finished. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 19 Document Ver.: 2.1a Release Sep., 2003 Figure 2.5: Configure the static ip address Press the commit if you finish the configuration. Figure 2.6: Commit the data Press the reboot if you want the configuration executed. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 20: Dhcp Mode

    Document Ver.: 2.1a Release Sep., 2003 Figure 2.7: Reboot the system 2.3.2 DHCP mode Enable the DHCP if you are using the cable modem or DHCP server. Figure 2.8: Enable the DHCP function Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 21: Pppoe Mode

    Press the PPPoE Configuration and put the info of the PPPoE account and password in the configuration table. Figure 2.9: Configure the PPPoE function Please commit the data and reboot the machine after you finished the configuration of PPPoE. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 22: Making A Voip Call

    Enter the H323 Configuration table and change the mode to Peer-to-Peer. Figure 2.10: Configure the Peer-to-Peer mode Press the OK button which is on the buttom of this page to save the configuration. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 23 Release Sep., 2003 Figure 2.11: Press OK to save the data Enter the Phone Book configuration table and configure the name, ip address and phone number of the destination. Figure 2.12: Phone Book Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 24 Insert prefix: To add a number you define in this table Press the “Add Data” button when you finished, and the new table will display on the first index if you press the Phone Book configuration button. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 25 Figure 2.14: To show the Phone Book record Phone Book is only for the Peer-to-Peer mode. Fifty index support. 【The application in the drop and insert function】 Input (E164) Drop Insert Output Disable Disable 0200 Enable Enable Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 26: Configure The Gateway Into The Gk Routed Mode

    GK routed. To change the GK information from your service provider (Ex: The Gatekeeper IP, Registered Prefix and Registered Alias). Figure 2.15: Configure the GK info Press the OK button which is on the buttom of this page to save the configuration. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 27: The Type In Gk Routed Mode

    Do not support the one-stage Support the one-stage dialing dialing The default type of the all series Welltech gateway are Gateway type. But the LanPhone is the terminal type. You could change the type for your gateway but the LanPhone couldn’t.
  • Page 28 【Example – Gateway type】 Figure 2.17: Gateway Type configuration The prefix number is necessary if you configure it to be a gateway. The number of ports must be followed the prefix number. 【Example – Terminal type】 Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 29 FXSO H.323 Gateway User Manual Document Ver.: 2.1a Release Sep., 2003 Figure 2.18: Terminal Type configuration The prefix number is only for the gateway type and the number of ports could be configured in the different numbers. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 30: Advanced

    Gateway is connected to the IP Sharing device. The IP Sharing Device must support the DMZ or Virtual server functions An example such as ADSL network is in the following. ATU-R ADSL Modem WAN ① Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 31 LAN. Besides, a valid IP Address meets the IP Sharing device (LAN site) is the element.  Please configure your gateway just like below: Enter the IP address, Netmask and the default gateway in the network table. Please follow up your IP Sharing device. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 32 FXSO H.323 Gateway User Manual Document Ver.: 2.1a Release Sep., 2003 Figure 3.1: Network configuration Enable the ip sharing function and put the static ip address in the server address table. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 33 IP Change function. It supports the static ip address. If user is using the dynamic ip address, this function has to be enabled. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 34 Please Commit it and Reboot the system if the configuration is finished. This chapter is focus on the DMZ function of the IP Sharing Device, Please get another application from our web site. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 35: Line

    No Answer forward number is 123, and the forward time is 5 seconds. The call will be forwarded to the destination with 123 numbers when the origin port didn’t answer the call. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 36 FXSO H.323 Gateway User Manual Document Ver.: 2.1a Release Sep., 2003  Registration – To show the gateway registered on the GK or not.  Status – To show the port is busy or ready. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 37: Gateway Prefix

    If the incoming call (From IP side) with the number is 10012345, and the prefix number of the destination gateway is 100. The gateway will receive 10012345. But the number it transfer will be 10012345 (Gateway Prefix Keep). The Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 38 Routing Table has been configured. Enter the System Configuration to configure this function (see figure 3.6) Figure 3.6: FXO Type  Normal – Following the origin usage  Force 2nddial – Any calls to FXO port will be the two-stage-dialing Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 39: T.38

     T.38 Fax ECM – Error Correction during fax high speed Mode support.  T.38 Fax ASN.1 Support – The transmission of voice data over packet switch networks support. Abstract Syntax Notation 1. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 40: Prefix

    Routing will check this calling number after the Prefix checked (see figure 3.) Follow the Routing you configure Check the Prefix Table first Follow the Default Routing Figure 3.9: The Priority There is an example about the configuration, please follow up these steps. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 41 (see figure 3.10) Figure 3.10: Configure the Prefix Table The usage is as same as the drop, insert function of the Phone Book. Input (Prefix) Drop Insert Output Disable Disable 0200 Enable Enable Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 42 Release Sep., 2003 Press the Prefix Configuration button to reload the configuration table (see figure 3.11) Figure 3.11: Show the added table Please Commit it and Reboot the system if the configuration is finished. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 43: Routing Table

    Fxs (Default) when the calls from the FXS port without any define rules. The destination will be the IP side Fxo (Default) when the calls from the FXO port without any define rules. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 44: Change The Default Routing

    Please follow up the steps if you want to change the default routing: Pick up the side for the incoming calls and define the destination of this side. Press the Change Default to save the data. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 45 Release Sep., 2003 Figure 3.13: Change The Default Setting The default setting is changed after you press the Change Default button. Please press the Routing Table button again to show the new setting. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 46: Add A New Routing Table

    Please Commit it and Reboot the system if the configuration is finished. 3.6.2 Add a new Routing Table The default setting is changed after you press the Change Default button. Please press the Routing Table button again to show the new setting. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 47 The min digits is 1 and max digits is 10. The call will follow this routing if the number I dial is between 1 and 10 digits. If I dial over 10 digits, this call will follow the default routing.  Hunt – Define the hunt group function. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 48 FXO and IP side. And the numbers you dial is between 1 and 10 digits. If this call matches the rule, it will be transferred to the FXO port whose E164 number is 1002. Please Commit it and Reboot the system if the configuration is finished. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 49: Fxo Password

     Index – The number of this table.  Password – The password you set.  Direction – Playing the IVR to PSTN, IP or both side. (Out – To IP side ; In – To PSTN side) Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 50: Ddns Configuration

     Password – Your password. Please get this info from your DDNS server.  IP Check Server – Will check the endpoints ip address.  Check Every – The endpoint will check the server after a period. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 51: Upgrade The Firmware

    FTP method. (see figure 3.19) Figure 3.19: ROM Upgrade for FTP Key in the IP address, the login name, password of your FTP server and the correct file name. (see figure 3.20) Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 52 TFTP program before you want to use the TFTP upgrade method. Pick up the “Rom Upgrade” button to enter the upgrading web page and switch to the TFTP method. (see figure 3.21) Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 53 Key in the IP address of your TFTP server, pick up the file type for your upgrade file and the correct file name for upgrading. (see figure 3.22) Figure 3.22 : TFTP information Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 54: Version And Information

    This is not for the configuration, it only show you the version of this firmware and some information about the firmware you use. Press the button and get more information about your firmware (see figure 3.23) Figure 3.23: Version and Information Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 55: Command List

    Execute the Hyper Terminal program, and then the following windows will pop-up on the screen. (START – Program files – Accessories – Communication – Hyper Terminal) Figure 4.1: Hyper Terminal Define a name such as ‘wg37’ for this new connection. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 56 After pressing OK button, the next window appear, and then choose COM1/2 Port, which you are going to use. Figure 4.3: Pick up the right interface to use Configure the COM Port Properties as following:  Bits per second: 9600 Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 57 FXSO H.323 Gateway User Manual Document Ver.: 2.1a Release Sep., 2003  Flow control: None Figure 4.4: Configure the right Bps and control Press ‘OK’ button, and then start to configure Gateway. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 58: Command List

    IP Packet ToS (Type of Service) values ddns Dynamic DNS update manipulation vlan VLAN configuration and information DSP payload type configuration and information ROM file update passwd Password setting information and configuration usage: help [command] Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 59: Quit]

    Stop showing debug messages. 4.2.4 [reboot] After commit command, type reboot to reload Gateway in new configuration. The procedure is as below: usr/config$ reboot .Attached TCP/IP interface to cpm unit 0 Attaching interface lo0...done Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 60: Flash]

    Configurations of IP address and MAC address will be kept. 4.2.6 [commit] Save changes after configuring Gateway. ----------------------------------------------------------------------------------------------- usr/config$ commit This may take a few seconds, please wait..Commit to flash memory ok! usr/config$ Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 61: Ifaddr]

    Obtain a set of Internet configuration from DHCP server assgined. SNTP mode (0=no update, 1=specify server IP, 2=broadcast mode). Example: ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254 ifaddr -dhcp 1 ifaddr -sntp 1 210.59.163.254 ifaddr -ipsharing 1 210.59.163.254 ifaddr –ipchange 1 Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 62 This is for a special function of IP-Sharing. Some devices could support different ip address from WAN and DMZ port. This function has to be enable if the ip address of DMZ port is different from the WAN port. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 63: Time]

    Release Sep., 2003 ----------------------------------------------------------------------------------------------- usr/config$ ifaddr -ipchange 1 -cmcenter Specify a management center IP Address. Welltech will provide a management center program to do centralized control for all devices. 4.2.8 [time] When SNTP function of Gateway is enabled and SNTP server can be found as well, type time command to show current network time.

  • Page 64: Pppoe]

    System information and configuration Usage: sysconf [-idtime digit][-keypad dtmf][-prefixsw digit] [-prefixdisab digit][-usrdefprefix digits] [-codec digit][-localrbt digit][-forwardtime digit] [-hwtype digit][-gwprefix digit][-ring on_time off_time] [-fxotype digit] sysconf -print -print Display system overall information and configuration. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 65 DTMF signal via In-Band type, “1” via H.245 UII Alphanumeric, “2” via H.245 UII Signal Type, and “3” via Q.931 UserInfo, and “4” via RFC2833 type. Users can adjust the value according to various applications. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 66 (instead of Line number of FXO Line)+ PSTN number to make a call to PSTN side connected with FXO Line. 2. After gateway-prefix-drop function is enabled, user must remember to re-configure line number of FXS Line, Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 67: H323]

    It’s for the 2nddial function. Any calls will be two-stage-dialing if user enable this function. 4.2.12 [h323] This command is for H.323 configuration related parameters. ----------------------------------------------------------------------------------------------- usr/config$ h323 H.323 stack information and configuration Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 68 1st response of a new call (1~20000). -passwd H.235 security password. Example: h323 -gk 210.59.163.171 -line1 70 -line2 71 -line3 72 -line4 73 h323 -alias Your_Alias_Name -gkid GK -gkdis 1 -passwd 1234 Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 69 FXS TEL2 number. -line4 assign FXO Line2 number. Note: User can also set “x” in line number to disable the port. If the port is disabled, it can only receive calls but not calling out. Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 70 RTP port range conflicts with Firewall policy. (each port of Gateway use 2 RTP ports) -ttl to set timer for TTL(Time To Live). Gateway would send RRQ, with keepAlive, to gatekeeper periodically according to TTL timer. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 71: Line]

    -config number [hunt number][hotline number][forward number] line -print Gateway line information. hunt Hunting group. hotline Hot line configuration. forward No answer forward for FXS line. Example: line -config 1 hunt 1 hotline 1003 forward 1002 usr/config$ Parameter Usages: Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 72 P2P Mode Usage: Set gateway under P2P mode. Create phone book table with “pbook ” command. Create a Hotline table with “line ” command. ------------------------------------------------------------------------------- usr/config$ pbook –add name welltech ip 10.1.1.1 e164 1001 Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 73 Create phone book table with “pbook ” command. Create a Hotline table with “line ” command. ------------------------------------------------------------------------------- usr/config$ pbook –add name welltech ip 10.1.1.1 e164 1001 usr/config$ line –config 2 hotline 1001 ------------------------------------------------------------------------------- In this example means: if user calls in FXO Line1, gateway will automatically dial out IP address of “1001”.

  • Page 74: Route]

    Max digits.(0 ~ 255) hunt Hunt method for busy forward(NONE:0 / GROUP:1 / ALL:2) Example: route -add prefix 100 dst 0 e164 1001 min 1 max 3 hunt 1 route -ip dst 0 e164 1001 Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 75 FXS TELs or FXO Lines to determine which port will this call be routed to. minimum digits needed. maximum digits needed. hunt set hunt method for busy forward. 0 means no hunting, 1 Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 76: Prefix]

    IP side. 4.2.15 [prefix] This command is for make rules for drop or insert prefix digits. ---------------------------------------------------------------------------------------------- usr/config$ prefix Prefix drop/insert information and configuration Usage: prefix -add [prefix number][drop number][insert digits] Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 77: Pbook]

    IP address. It is effective only in peer-to-peer mode. When adding a record to Phone Book, users also have to reboot machine, and the record will be effective immediately. ----------------------------------------------------------------------------------------------- usr/config$ pbook Phone book information and configuration Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 78 (Ex. pbook –print Note: <index number> means the sequence number in phone book. If users do request a specific index number in phone book, Gateway will give each record a automatic sequence number as index. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 79: Voice]

    [-send [G723 ms] [G711A ms] [G711U ms] [G729 ms] [G729A ms] [G729B ms] [G729AB ms] ] [-volume [voice level] [input level] [dtmf level]] [-nscng [G711U used1] [G711A used2] [G723 used3]] [-echo used] [-mindelay t1] [-maxdelay t2] [-optfactor f] voice -print Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 80 -maxdelay Setting of jitter buffer max delay. (0~150, default: 150). Example: voice -send g723 60 g711a 60 g711u 60 g729 60 g729a 60 g729b 60 g729ab 60 voice -volume voice 20 input 32 dtmf 27 voice -echo 1 1 usr/config$ Parameters Usage: Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 81 DTMF volume/level, which sends to its own Line. ----------------------------------------------------------------------------------------------- Note, level of volume is too high or too low may be result in bad performance while connecting to each other. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 82: Support]

    T.38(FAX) ASN.1 support enable/disable. -faxrdd FAX redundancy depth(0 ~ 2). -fstart Fast start enabled/disabled. -tunnel H245 Tunneling enabled/disabled. -h245fs H245 message after FastStart support enabled/disabled. -earlyh245 EarlyH245 support enabled/disabled. Example: support -t38 1 Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 83 The function is effective only when both sides support H.245 tunnel. -h245fs If the function is ON, Gateway can send H.245 messages after FastStart. -earlyh245 enable/disable early H.245 function. The function is effective only when both sides support early H.245. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 84: Phone]

    : ringback tone busy tone dial tone flash: flash tone -ring ringing configuration set . -rbt ringback tone configuration set . busy tone configuration set . dial tone configuration set . Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 85 Ringback Tone frequency high level : 13 Ringback Tone frequency low level : 13 Ringback Tone tone1 on : 100 Ringback Tone tone1 off : 200 Ringback Tone tone2 on : 1023 Ringback Tone tone2 off : 1023 usr/config$ Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 86: Tone]

    [num][freqHi ][freqLo ][freqHiLev][freqLoLev] [Tone1ON][Tone1OFF][Tone2ON ][Tone2OFF ]] tone -print Display disconnect tone configuration. [num] Tone index(1~4:Disconnect tone / 5~8:Remote ring back tone). Example: tone -print tone 1 620 480 8 8 50 50 1023 1023 usr/config$ Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 87: Fxopwd]

    This command is for FXO ports. ----------------------------------------------------------------------------------------------- usr/config$ fxopwd FXO password information and configuration Usage: fxopwd -add [passwd number][direction number] fxopwd -delete index fxopwd -modify index [passwd number][direction number] fxopwd -print FXO password information. passwd The password. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 88: Record]

    User can record greeting and askpin file and analyze tone frequency by calling in FXO line of Gateway. ----------------------------------------------------------------------------------------------- usr/config$ record Recoed greeting voice and ask pin code voice, tone analize. Usage: record -greeting filename -askpin filename -tone Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 89 Press (S) to stop record......................................................s............................ Press (P) to play the voice or (W) to write to flash or (Q) to quit... Please wait a moment... Write flash ok... Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 90 Press (R) to start record... Press (S) to stop record...................................................................................................s................................................Press (P) to play the voice or (W) to write to flash or (Q) to quit... Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 91 Press (R) to start record............................................................. Analyzing!! Please wait a moment…….. Frequency 1 : 480 Frequency 2 : 620 Frequency 3 (2623) is more than 1000, please ignore it. usr/config$ Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 92 When you get the disconnect tone from the phone set of the Tel 1 port, press <R> and <ENTER> buttons to start recording the disconnect tone. Please hang up the phone if you get the message as below：Analizing!! Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 93 Frequency 3 : 621 tone 4 481 621 8 8 25 25 1023 1023 (Put this value in to the tone table) tone –print Disconnect tone 1 paramter Frequency high : 620 frequency low : 480 Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 94 Tone1 off : 25 Tone2 on : 50 Tone2 off : 50 (Confirm the values is correct or not) (Key in the commit and reboot command if you finish the procedures as above) Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 95 : 480 frequency high level frequency low level Tone1 on : 25 Tone1 off : 25 Tone2 on : 1023 Tone2 off : 1023 Disconnect tone 2 paramter Frequency high : 450 Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 96: Tos]

    (Key in the commit and reboot command if you finish the procedures as above) 4.2.23 [tos] IP Packet ToS(type of Service)/Differentiated Service configuration. ----------------------------------------------------------------------------------------------- usr/configtos IP Packet ToS(type of Service)/Differentiated Service configuration Usage: Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 97: Ddns]

    [-delay time] [-force IP] -print Display Dynamic DNS information and configuration. -enable 1:Enabled/0:Disable the dynamic DNS service. -server Specify DDNS server address. -hostname Registered domain name. Registered account ID. -passwd Registered account password. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 98: Pt]

    RTP payload type configuration and information Usage: pt-print Display the RTP payload type information -rfc2833 Configure the DTMF RFC2833 payload type -dtmf Configute the DTMF payload type -fax Configure the FAX payload type Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 99: Rom]

    -method download via TFTP/FTP (TFTP: mode=0, FTP: mode=1) -ftp specify username and password for FTP Note: This command can run select one option in 'app', 'boot', , 'dsptest', 'dspcore', and 'dspapp'. Copyright (c) 2002 Welltech Computer Co. Ltd.

  • Page 100: Passwd]

    Password setting information and configuration Usage: passwd -set Loginname Password passwd -clean Note: 1. Loginname can be only 'root' or 'administrator' 2. passwd -clean will clear all passwd stored in flash, please use it with care. Example: Copyright (c) 2002 Welltech Computer Co. Ltd.
  • Page 101 Note : “login name” can be “root” or “administrator” only. “root” and “administrator” have the same authorization, except some commands that can be executed by “root” only – “passwd –clean”, “rom –boot”, ”rom –bot2m” and “flash –clean”. Copyright (c) 2002 Welltech Computer Co. Ltd.

This manual is also suitable for:

Fxso gateway h.323 3702a - version 2.1a3701a3702a

Table of Contents