1. Manuals
  2. Brands
  3. WELLTECH Manuals
  4. Gateway
  5. FXO-08 - V2.0A
  6. User manual

WELLTECH FXO-08 - V2.0A User Manual

8-ports fxo sip voip gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
8-ports FXO VoIP Gateway
User Manual
Revision Information
Version
Date
EN-V2.0a
April-8-2008
FXO-08
(SIP)
Description
nd
2
English Version

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FXO-08 - V2.0A and is the answer not in the manual?

Questions and answers

Related Manuals for WELLTECH FXO-08 - V2.0A

Summary of Contents for WELLTECH FXO-08 - V2.0A

  • Page 1 FXO-08 8-ports FXO VoIP Gateway (SIP) User Manual Revision Information Version Date Description EN-V2.0a April-8-2008 English Version...

  • Page 2: Table Of Contents

    FXO-08 Technical Manual EN-V2.0a Table of Contents 1. Introduction ........................... 3 1.1 FXO-08 --8-ports FXO VoIP Gateway................3 1.2 Benefits: ..........................3 1.3 Physical Interface: ......................3 1.4 Specification:........................4 1.5 Setting and maintenance ....................5 1.6 Environmental........................5 2. Appearance ..........................6 2.1 Front Panel: LED Indicators....................
  • Page 3 FXO-08 Technical Manual EN-V2.0a 3.4.3 Codec Setting ......................... 45 3.4.5 Tone Setting ........................47 3.4.6 Phone Setting......................... 49 3.4.7 Digit Manipulation......................51 3.4.8 Dial Plan.......................... 53 3.5 Management ........................55 3.5.1 Provision Server ......................55 3.5.2 Save-Reload setting....................... 56 3.5.3 Upgrade Firmware......................57 3.5.3.1 Updating the firmware by FTP.................

  • Page 4: Introduction

    FXO-08 Technical Manual EN-V2.0a 1. Introduction 1.1 FXO-08 --8-ports FXO VoIP Gateway The FXO-08 is an 8-ports FXO VoIP gateway to connect with PSTN line, PABX extension port, and includes 1-WAN/4-LAN 10/100 base-T NAT router for diverse network environment. Field-proven quality of Voice communication and Fax transmission over IP broadband access network to make FXO-08 be an excellent solution for various VoIP applications.

  • Page 5: Specification

    FXO-08 Technical Manual EN-V2.0a AC power Jack Status indicated LED Indicates Ethernet, FXO, and SIP system status 1.4 Specification: IP Network connection IPv4 (RFC 791) Ø MAC Address (IEEE 802.3) Ø PPPoE Client (RFC 2516) Ø DNS Client Ø DHCP Client (RFC 2131) Ø...

  • Page 6: Setting And Maintenance

    FXO-08 Technical Manual EN-V2.0a Echo Cancellation (G.165/G.168) Ø Signaling Protocol: Loop Start Ø Jitter Buffer – Adaptive & Configurable Ø Packet Loss compensation - increasing voice quality Ø DTMF: In-band, Out -of-band (RFC 2833), and SIP-Info Ø Caller ID Detection-FSK/DTMF/ETSI(Before ringing)/ESTI(Between Ø...

  • Page 7: Appearance

    FXO-08 Technical Manual EN-V2.0a Operating Temp. & Humidity Temp.: 0¢J¡ã45¢J (32¢K¡ã113¢K) Humidity: 10¢H¡ã 85% relative humidity, non-condensing Storage Temp. & Humidity Temp.: 0¢J¡ã55¢J (32¢K¡ã131¢K) Humidity: 10¢H¡ã 95¢H relative humidity, non-condensing AC Power Adaptor: INPUT: AC100V-240V, 50/60Hz OUTPUT: DC 12V, 3.0A Regulatory Compliance: FCC (Part 15, Class B) &...
  • Page 8 FXO-08 Technical Manual EN-V2.0a data is transmitted through this port, it will flash green. LAN 3 This will light up green when the gateway’ s LAN port 1 is physically connected to a local network (Refer to Rear Panel section in page number for location of LAN port 3). When data is transmitted through this port, it will flash green.

  • Page 9: Rear Panel

    FXO-08 Technical Manual EN-V2.0a 2.1 Rear Panel: Item Description Reset Press and hold over 5 seconds to reload factory default setting, this will erase all the settings configured on the gateway. The RJ-11 FXO port 8, connects PSTN line or the extension line of PABX.

  • Page 10: Environment Setup And Ip Connection

    FXO-08 Technical Manual EN-V2.0a 3. Environment Setup and IP Connection Please make sure that the network interface of your computer is working fine and cross over line (RJ-45) is connected to the computer correctly. You can also connect your computer to the gateway using a hub. The FXO-08 by default uses DHCP for its LAN port and assigns IP addresses to clients connected to it, please make sure that your PC or Notebook’...
  • Page 11 FXO-08 Technical Manual EN-V2.0a 3. You will see a pop-up window requesting username and password before you can login to the web configuration menu. Username is “root” while password is blank “ “ (see figure below). 3. You will enter the main page of the web configuration interface after you keyed in the username and password correctly (see figure below).

  • Page 12: Network Configuration

    FXO-08 Technical Manual EN-V2.0a 3.2 Network Configuration The following instructions will explain the configurations for setting up the WAN port of the FXO-08. There are in total three methods of connections: Static IP, DHCP and PPPoE. Note: You can retrieve the IP address of the WAN port by following steps: 1.
  • Page 13 FXO-08 Technical Manual EN-V2.0a WAN Setting Item Description Static IP DHCP PPPoE Connected mode Select the connection method for the WAN port of the FXO-08, you can choose the following: Static IP DHCP PPPoE Current IP Address Show current IP address DNS server mode Select the DNS behavior, you can choose the following:...
  • Page 14 FXO-08 Technical Manual EN-V2.0a WAN Setting Item Description Static IP DHCP PPPoE Default gateway Specify the IP address of the default gateway. Remote access Restricts/Blocks users restriction connecting to the WAN port’ s IP remotely, you can Enable/Disable this option. PPPoE userID Specify the username of the PPPoE account...

  • Page 15: Wan Setting --Static Ip

    FXO-08 Technical Manual EN-V2.0a 3.2.1.1 WAN Setting --Static IP 1. Press the “Apply” button (at the bottom) after you finish to save changes. 2. Press the “Reboot” button to apply the changes.

  • Page 16: Wan Setting --Dhcp

    FXO-08 Technical Manual EN-V2.0a 3.2.1.2 WAN Setting --DHCP Press the “Apply” button (at the bottom) after you finish to save changes. 2. Press the “Reboot” button to apply the changes. 3.2.1.3 WAN Setting --PPPoE 1. Press the “Apply” button (at the bottom) after you finish to save changes. 2.

  • Page 17: Lan Setting

    FXO-08 Technical Manual EN-V2.0a 3.2.2. LAN Setting LAN Setting ITEM Description LAN IP address Specify the IP address of the FXO-08’ s LAN port. LAN mask address Specify the mask address for FXO-08’ s LAN port. DHCP server Enable/Disable DHCP function on the LAN port.
  • Page 18 FXO-08 Technical Manual EN-V2.0a LAN Setting ITEM Description Domain Name You can specify the domain name that will be assigned by the DHCP server to the attached network devices. The DHCP server will send information on the “server host name” to the DHCP client.

  • Page 19: General Configuration

    FXO-08 Technical Manual EN-V2.0a 3.3 General configuration To make VoIP calls, you will need a SIP account provided by the SIP Proxy you are registered with. To configure the relevant SIP settings, please refer to the instructions explained below. 3.3.1 SIP Setting 3.3.1.1 Proxy mode Primary proxy address Specify the data of primary proxy :...
  • Page 20 FXO-08 Technical Manual EN-V2.0a Blending mode (Representative Number & L1~L8 Separate Number mode) Representative Number Input the relevant data for Enable line, Register status, SIP Account, Number, Password, and Display Name. Note: If you use the representative number to register, please check the max.
  • Page 21 FXO-08 Technical Manual EN-V2.0a If you Enable the Secondary proxy, system will display the “Secondary proxy call Number Configuration” figure as shown below. Secondary proxy Call Number If you enable the secondary proxy, configuration System will display “Secondary proxy Call Number configuration” figure, Please refer to the description of “Primary proxy Call Number configuration”...

  • Page 22: Peer To Peer Mode (Fxoßàfxs)

    FXO-08 Technical Manual EN-V2.0a 3.3.1.2 Peer to Peer mode (FXOßàFXS) Please refer to the Appendix A : Application Note 1...

  • Page 23: Sip Advanced Setting

    FXO-08 Technical Manual EN-V2.0a 3.3.2 SIP Advanced Setting Local SIP port (1~65535) Specify the local SIP port’ s number. Local RTP port (1~65535) Specify the local RTP port’ s number. Session Expire(Sec) Specify the session expire time that will be used to negotiate with the remote host or proxy.
  • Page 24 FXO-08 Technical Manual EN-V2.0a This will add the parameter refresher=uac or uas in the Session Refresh Request message. Unregister All Send SIP unregister signaling message after the FXO-08 has been restarted Early media Treatment Use early media treatment SIP protocol, where SIP invite messages will not include SDP.
  • Page 25 FXO-08 Technical Manual EN-V2.0a FXO-08 sends an Invite message and does not receive a response within 10 seconds, it will cancel the call. Press the “Apply” button (at the bottom) after you finish to save changes. 2. Press the “Reboot” button to apply the changes.

  • Page 26: Payload Type Setting

    FXO-08 Technical Manual EN-V2.0a 3.3.3 Payload Type Setting RFC2833 payload type Specify the RFC2833 payload type (range is 96~128, however 100, 102~105 is reserved by other payload types). T.38 FAX payload type Specify the FAX payload type (range is 96~128, however 100, 102~105 is reserved by other payload types) T.38 Redundancy payload type Specify the Redundancy payload type...
  • Page 27 FXO-08 Technical Manual EN-V2.0a other payload types). Modem relay payload type Specify the Modem relay payload type (range is 96~128, default value is 105. 100, 102~104 is reserved by other payload types). Press the “Apply” button (at the bottom) after you finish to save changes. 2.

  • Page 28: Line Setting

    FXO-08 Technical Manual EN-V2.0a 3.3.4 Line Setting Representative Forward Specify the Representative forwarding type to use, you can choose the following: Disable...
  • Page 29 FXO-08 Technical Manual EN-V2.0a Unconditional Busy No Answer (FXS only) The “Disable” option will allow you to disable this particular function. Representative Forward Number Specify the number to forward the call to when the call forwarding feature is enabled. No Answer Forward Time (FXS If you enable the No Answer Forward only) function (Representative number or...
  • Page 30 FXO-08 Technical Manual EN-V2.0a disable this particular function. Forward Number Specify the number to forward the call to when the call forwarding feature is enabled. Reg. Displays the registration status, whether it is registered or not. Status Displays the line status, whether it is ready (Idle) or busy.

  • Page 31: Qos Setting

    FXO-08 Technical Manual EN-V2.0a 3.3.5 Qos Setting Type Select Qos Type: DSCP or ToS Differentiated Services Code Point Setting (DSCP) DSCP RTP Select the DSCP value for RTP (voice packets), the value in the drop down list is expressed in binary format, you can choose the following:...
  • Page 32 FXO-08 Technical Manual EN-V2.0a DSCP Signal Select the DSCP value for SIP message, the value in the drop down list is expressed in binary format, you can choose the following: ToS Setting ToS RTP Select the ToS value for RTP (voice packets), the value in the drop down list is expressed in binary format, you can choose the following:...
  • Page 33 FXO-08 Technical Manual EN-V2.0a Press the “Apply” button (at the bottom) after you finish to save changes. 2. Press the “Reboot” button to apply the changes.

  • Page 34: Nat Setting

    FXO-08 Technical Manual EN-V2.0a 3.3.5 NAT Setting IPSharing Mode Select IPSharing mode : Enable or Disable IPSharing Address Specify the IPSharing Address when the IPSharing feature is enabled. Press the “Apply” button (at the bottom) after you finish to save changes. 2.

  • Page 35: Speed Dial Setting

    FXO-08 Technical Manual EN-V2.0a 3.3.7 Speed Dial Setting Speed Dial Editor Specify the speed Dial Number/Telephone Number/Name, then press the Add or Del button to add or delete record 1. Press the “Reboot” button to apply the changes.

  • Page 36: Caller Id Setting

    FXO-08 Technical Manual EN-V2.0a 3.3.8 Caller ID Setting Caller ID Setting (Line 1~Line 8) Enable/Disable the caller ID detection AUTO: You can Enable/Disable this function by line. If Line1~Line 8 uses the same mode, you only need to set line 1 and click the “Auto” button, then the other lines will set the same mode automatically.

  • Page 37: Cdr Setting

    FXO-08 Technical Manual EN-V2.0a 3.3.9 CDR Setting CDR mode Select the CDR mode for Enable or Disable. If you Enable this feature, please specify the CDR Server address and port number at the CDR server address and port’ s text box, then you can get Call Detail Data form CDR Server.

  • Page 38: Syslog Setting

    FXO-08 Technical Manual EN-V2.0a 3.3.10 Syslog Setting Syslog mode Select the Syslog mode for Enable or Disable. If you Enable this feature, please specify the Syslog Server address and port number at the Syslog server address and port ’ s text box, then you can get detail system log from Syslog server.

  • Page 39: Advanced Configuration

    FXO-08 Technical Manual EN-V2.0a 3.4 Advanced Configuration 3.4.1 System setting prack PRACK is defined in RFC 3262: Reliability of Provisional Responses in SIP. You can accommodate your softswitch (Proxy Server) to Enable or Disable this feature. ROH (FXS only) Send billing signal (FXS only) T.38 NoAttribute No attribute (Fax version, BitRate, Buffer, Datagram…...
  • Page 40 FXO-08 Technical Manual EN-V2.0a T.38 ByPass Auto T.30 FAXByPass Codec Select the FAX ByPass Codec to use, you can choose the following: G.711 a-law G.711 u-law G.726 32k Flash key function (FXS only) Keypad DTMF type Select the type of Keypad DTMF, you can choose the following: In-Band RFC2833...
  • Page 41 FXO-08 Technical Manual EN-V2.0a the IP address of the WAN/LAN port by following steps: 1. You can get a PSTN line and connect to the L1 FXO port. 2. Use another PSTN phone to dial the PSTN number (in step 1you connected on FXO-08), you will hear a second dial tone or greeting (please dial extension number).
  • Page 42 FXO-08 Technical Manual EN-V2.0a Press the “Apply” button (at the bottom) after you finish to save changes. Press the “Reboot” button to apply the changes.

  • Page 43: Sntp Setting

    FXO-08 Technical Manual EN-V2.0a 3.4.2 SNTP Setting SNTP mode Select the SNTP mode : On or Off SNTP server address Specify the SNTP server address for time synchronization. Time Zone -GMT Select the Time Zone of your location Time setting You can specify the time with year/month/date /hour/minute /second when you select the SNTP...

  • Page 44: Codec Setting

    FXO-08 Technical Manual EN-V2.0a 3.4.3 Codec Setting Codec Priority You can specify the priority of the codec from First to Fifth (first being the highest priority and Fifth being the lowest). You can choose the following codecs: G711U G711A G723 G729 G726 Codec Packet Size...
  • Page 45 FXO-08 Technical Manual EN-V2.0a shown above, system will set default requirement of bandwidth. Press the “Apply” button (at the bottom) after you finish to save changes. Press the “Reboot” button to apply the changes.

  • Page 46: Codec Setting

    FXO-08 Technical Manual EN-V2.0a 3.4.3 Codec Setting Jitter Buffer Minimal Delay Specify the minimal delay of the jitter buffer. The range is 0~150 ms and the default setting is 0 ms. Maximal Delay Specify the maximal delay of the jitter buffer.
  • Page 47 FXO-08 Technical Manual EN-V2.0a lines. Remote receive volume Specify the volume gain of the voice in (IP Side hears) the remote side (0~63, default is 32). You can set this option for each of the 8 lines. DTMF volume Specify the volume gain of the DTMF (0~63, default is 27).

  • Page 48: Tone Setting

    FXO-08 Technical Manual EN-V2.0a 3.4.5 Tone Setting Dial tone Specify the pattern of the Dial tone, you can adjust the high frequency, low frequency, high level, low level, the On and Off time for tone 1 and 2. Ringback tone (FXS only) Specify the pattern of the Ringback tone, you can adjust the high frequency, low frequency, high level,...
  • Page 49 FXO-08 Technical Manual EN-V2.0a Disconnect tone 2 Specify the pattern of the disconnect tone for disconnect tone 2 (second set), you can adjust the high frequency, low frequency, high level, low level, the On and Off time for tone 1 and 2. Press the “Apply”...

  • Page 50: Phone Setting

    FXO-08 Technical Manual EN-V2.0a 3.4.6 Phone Setting Primary Ringing (FXS only) Ringing Frequency Specify the Ringing frequency value. ringing frequency : 15~100 (Unit : Hz) Ringing ON Specify the Ringing ON value . ringing ring ON : 0~8000 (Unit : ms) Ringing OFF Specify the Ringing OFF value.
  • Page 51 FXO-08 Technical Manual EN-V2.0a ringing frequency : 15~100 (Unit : Hz) Ringing ON Specify the Ringing ON value. ringing ring ON : 0~8000 (Unit : ms) Ringing OFF Specify the Ringing OFF value. ringing ring OFF : 0~8000 (Unit : ms) Ringing level Specify the ringing level.

  • Page 52: Digit Manipulation

    FXO-08 Technical Manual EN-V2.0a 3.4.7 Digit Manipulation Digit Manipulation Testing This option allows users to test dial a number and check the resulting dialed number and its routing path that is edited by the Digit Manipulation Editor function (see Digit Manipulation Editor section below for more information on it).
  • Page 53 FXO-08 Technical Manual EN-V2.0a Prefix: 02 Drop: Enable Insert: Route: VOIP If the user dials 0282265699, the resulting dial out number will be 82265699. Second Example (PSTNàIP) Prefix: 7 Drop: Disable Insert: 886 Route: VOIP If the user dials 778, the resulting dial out number will be 886778.

  • Page 54: Dial Plan

    FXO-08 Technical Manual EN-V2.0a 3.4.8 Dial Plan Dial Plan Editor Using this feature, users can specify the number that will be immediately dialed out without having to press the “#” (at the end of the dialed number) on the keypad or until the dial time timeout period.
  • Page 55 FXO-08 Technical Manual EN-V2.0a Total digit count: 4 Route: VOIP If the user dials an 4 digit number (e.g. 6680), the FXO-08 will immediately detect it and dial this number straight away. Third Example Function: Disable Leading digit: 02 Total digit count: 10 Route: VOIP If the user set the Function parameter as “Disable”, the call number with a...

  • Page 56: Management

    FXO-08 Technical Manual EN-V2.0a 3.5 Management 3.5.1 Provision Server Note: The provision function is only compatible with some proprietary provision server. If you need this requirement, please contact with your agent. Provision server Mode Enable/Disable provision function Provision server IP address Specify the Provision Server’...

  • Page 57: Save-Reload Setting

    FXO-08 Technical Manual EN-V2.0a 3.5.2 Save-Reload setting Export File Click the “Export ” button to export “user.cfg” data Import File Specify the file path and file name to Import the configure data. Press the “Reboot” button to apply the changes.

  • Page 58: Upgrade Firmware

    FXO-08 Technical Manual EN-V2.0a 3.5.3 Upgrade Firmware Download mode Select the connection method to update the FXO-08’ s firmware, you can choose the following: TFTP TFTP/FTP server IP address Specify the TFTP/FTP server’ s IP address. FTP login Specify the login username/password for the FTP server.

  • Page 59: Updating The Firmware By Ftp

    FXO-08 Technical Manual EN-V2.0a 3.5.3.1 Updating the firmware by FTP 1. Select FTP mode in the drop down list. 2. Key in the IP address, login name, password of your FTP server and specify the correct filename of the firmware. 3.

  • Page 60: Updating The Firmware By Tftp

    3.5.3.2 Updating the firmware by TFTP 1. First, download the TFTP program from our website http://www.welltech.com/support/utility.htm. Unzip the TFTP to a directory that you desire in your hard drive and execute the TFTP program. Make sure that the TFTP program points to the directory of where your firmware is stored.

  • Page 61: Updating The Firmware By Http

    FXO-08 Technical Manual EN-V2.0a 3.5.3 3 Updating the firmware by HTTP 1. Under Device Management => Software Upgrade web menu, specify the location of the firmware by clicking the Browse button next to the Http Upload text box. 2. You will be prompted with a window requesting the location of the firmware. 3.

  • Page 62: Reset To Default

    FXO-08 Technical Manual EN-V2.0a 3.5.4 Reset to Default Users can restore back to factory default settings using this feature. The password of the account and the network configurations are the things that will not be changed when this feature is executed.

  • Page 63: Network Status

    FXO-08 Technical Manual EN-V2.0a 3.5.5 Network Status Connection mode Displays the current connection mode. Current IP address Displays the current IP address of the WAN port. Subnet mask Displays the current subnet mask’ s IP. Default gateway Displays the current default gateway’ s Primary DNS address Displays the current primary DNS address.

  • Page 64: Version Info

    FXO-08 Technical Manual EN-V2.0a 3.5.6 Version Info. Boot version Displays the current boot version loaded on the FXO-08. Post version Displays the current post version loaded on the FXO-08. Application version Displays the current application version loaded on the FXO-08.

  • Page 65: Port Status

    FXO-08 Technical Manual EN-V2.0a 3.5.7 Port Status Item Displays the corresponding port number. Status Displays the status of the port. Port Type Displays the port type (FXS,FXO)of the corresponding port number. Register Displays the registration status of the corresponding port number.

  • Page 66: Password

    FXO-08 Technical Manual EN-V2.0a 3.5.8 Password Username Select the type of user name that you would like to configure the password for, you can choose the following: root user Current password Specify the current password for the user selected in the drop down list above.

  • Page 67: Rebooting The System

    FXO-08 Technical Manual EN-V2.0a 3.6 Rebooting the system Executing this function will reboot the whole system, when configuration changes are made to the device, it needs to be rebooted for the changes to take effect (see figure below).

  • Page 68: Appendix A --Application Note 1

    FXO-08 Technical Manual EN-V2.0a Appendix A --Application Note 1 Peer to Peer mode (PABX ßàFXOßàFXS) with Hotline (FXOßàFXS) In this application, the distance of PABX extension is not limited. You can use the same PABX in two or more branches. Configuration: 1.
  • Page 69 FXO-08 Technical Manual EN-V2.0a A side : (FXO-08 : IP address 10.1.1.2) General Configuration— Line Setting Line 1~Line 8 Please refer to the figure shown above, (A side--FXO) Enable Hotline and specify the Hotline number (In this application FXO and FXS number is the same with PABX Extension#) Press the “Apply”...
  • Page 70 FXO-08 Technical Manual EN-V2.0a 2. B side: (FXS-08 : IP address 10.1.1.3) General Configuration— SIP Setting Primary proxy/P2P IP Specify the destination (A side) IP (B side) Address of Peer to Peer mode, and specify the port# with 5060. Call number configuration Representative number Disable and unregistered the (B side)
  • Page 71 FXO-08 Technical Manual EN-V2.0a B side : (FXS-08 : IP address 10.1.1.3) General Configuration— Line Setting Line 1~Line 8 Please refer to the figure shown above, (B side--FXS) Enable Hotline and specify the Hotline number (In this application FXO and FXS number is the same with PABX Extension#) Press the “Apply”...

This manual is also suitable for:

Fxo-08

Table of Contents