To De-Register A Handset - Marks & Spencer IDECT X2I TWIN Manual

Color profile: Disabled
Composite Default screen
Registration If registration has failed, the handset's display will show
failed? searching... for a few seconds then return to
standby mode.
If this happens, try again, making sure you don't leave
too long between steps. If you still can't register the
handset, contact the Help Line for advice.
To de-register You may need to do this in order to replace a
a handset faulty handset.
1 Press the MENU button
è
The display shows
Press the â button THREE times
2
è
The display shows
Press the MENU/OK button then the â
3
button THREE times
è
Display shows
4 Press the MENU/OK button
è
Display briefly shows
è
Display then shows
5
Key in the PIN and press MENU/OK
è
Display shows
of all other handset registered to the base.
Press the number of the handset to be unregistered
6
è
You will hear a long confirmation beep.
è
Display shows
Repeat from 4 to unregister another handset or use the
CANCEL button to exit the menu or press and hold
7
HANG UP button to go to standby mode.
NOTE: The handset that has been unregistered shows
" ' unregistered" ' .
Help Line:
0845 671 0665 (Local Call rate)
Main Menu >Phonebook
Main Menu >Advance Set
Advance Set >Unregister
>Unregister
>Enter PIN
and the numbers
>Unregisterd
Advance set > Unregister
57