Answering machine setup
The outgoing
The telephone is supplied with two predefined outgoing
message
messages (OGM). One is for use in ANSWER ONLY
mode and one for use in A
■
Both of these can be replaced with your own pre-
recorded message if you prefer.
■
To pre-record an outgoing message you must first
follow the procedure to set the answer mode
To record a
After setting the answer mode you can choose
new outgoing
between using a predefined outgoing message
message:
or using a personalised one that you have
recorded. If you select Personalised you will
then need to record a new message.
1
Follow steps 1 to 5 on page 29
è
Display Shows
Press the â button to select Personalised
2
and press the MENU/OK button
è
Display shows
3
Press the MENU/OK button to play the
existing message
Press the â button and the MENU/OK
4
button to record a new message
è
Display Shows
5
Speak clearly into the handset
6
Press the MENU/OK button to end the
recording. Your message will play back
automatically.
è
Display Shows
7
If you a
re not happy with the result,
repeat steps 2.
8
Use the CANCEL button to exit the menu
30
nswer
& R
ec.
mode.
Select mess >Predefined
>Play message
>
Record
mess
Select mess>Personalised