Remote Operation; To Activate Remote Control - Marks & Spencer IDECT X2I TWIN Manual

Remote operation

The telephone will allow you to check your messages
remotely from another phone. To use this function you
must be using a tone dialling telephone and you will need
to enter your telephone's master PIN.
The remote control function must be activated before it
can be used.
Press the MENU/OK button ONCE then á
To activate 1
remote
ONCE
control:
è
Display Shows
Press the MENU/OK button ONCE then á
2
ONCE
è
Display Shows
Press the MENU/OK button ONCE then á
3
TWICE
è
Display Shows
4
Press the MENU/OK button
è
Display Shows
Press the â button to select between
5
Activated and Deactivated
è
Display Shows
6 Press the MENU/OK button to confirm the
selection
è
You will hear a confirmation beep
7
Use the CANCEL button to exit the menu or
press and hold HANG UP to go to standby
mode
Help Line:
0845 671 0665 (Local Call rate)
Remote operation
Main Menu >Ans Machine
Answ. Machine >Settings
Ans Settings >Remote Access
Remote Access >Deactivated
Remote Access >Activated
37