Setting The Ring Delay - Marks & Spencer IDECT X2I TWIN Manual

Setting the You can adjust the number of rings that sound
ring delay before the machine answers the call:
1
Press the MENU/OK button ONCE then the
á button ONCE
è
Display Shows
2 Press the MENU/OK button ONCE then the
â button FIVE times
è
Display Shows
3 Press the MENU/OK button
è
Display Shows
4
Press the MENU/OK button
è
Display Shows
Use the á â buttons to adjust the ring
5
delay between 3 and 8 rings or Toll Saver
If you select Toll Saver the telephone will
answer after 3 rings, if there are new messages on
the answering machine, but after 5 rings if there
are no new messages. This allows you to call from
a remote telephone to check your messages,and if
it does not answer after 3 rings, you know there
are new messages, so you can hang up without
being charged for the call.
6 Press the MENU/OK button to confirm the
new setting
7
Use the CANCEL button to exit the menu or
press and hold HANG UP to go to standby
mode
Help Line:
0845 671 0665
(Local Call rate)
Answering machine setup
Main Menu >Ans Machine
Ans Machine >Settings
Settings >Ring Delay
Ring Delay >5 rings
31