To Change The Pin - Marks & Spencer IDECT X2I TWIN Manual

Color profile: Disabled
Composite Default screen
The master The Master PIN (personal identity number, or security
PIN code) is required when handsets are registered and
deregistered, and when important changes to the
settings are made.
The default setting for the PIN is 0000. To protect your
handset's settings, we recommend that you change it to
a four-digit number you'll easily remember.
Press the
1
To change
è
The display shows
the PIN:
Press the â button THREE times
2
è
The display shows
Press the MENU/OK button then the â
3
button Four times
è
Display shows
If the PIN is still at default 0000:
Press the MENU/OK button
4
è
Display Shows
5 Key in the new PIN and
press the MENU/OK button
è
Display shows
6
Key in the new PIN and press the
MENU/OK button
è
Display briefly shows
è
You will hear a long confirmation beep.
Use the CANCEL button to exit the menu or press
7
and hold HANG UP to go to standby mode.
If the PIN is not at default 0000.repeat steps 1---3.
Press the MENU/OK button
4
è
Display Shows
5
Key in the current PIN and
press the MENU/OK button
è
Display shows
Help Line:
0845 671 0665 (Local Call rate)
Custom settings
MENU/OK button
Main Menu >Phonebook
Main Menu >Advance Set
Advance Set >Master PIN
Enter New PIN
Confirm PIN
>New PIN stored
Enter PIN
Enter New PIN
45