Switching On And Off; To Lock The Keypad - Marks & Spencer IDECT X2I TWIN Manual

Color profile: Disabled
Composite Default screen

Switching on and off

To switch the To switch the handset off (in case you need to
save battery power when the handset is away
handset on
from the base unit):
and off
◗
Press the HANG UP button and hold it for
4 seconds
è
The display goes blank.
To switch the handset back on:
◗
Briefly press the HANG UP button, or replace
the handset on the base unit or charger pod
è
The display shows
detects the base unit it will return to standby
mode.
◗
To lock the Press the LOCK/* button and hold it for
2 seconds.
keypad
è
The display shows
To unlock the keypad:
◗
Press the LOCK/* button and hold it for
2 seconds or replace the handset on the
base unit or charger pod
Notes ■ When the handset is switched off, it can't be used for
making calls, including emergency calls.
■ When the handset is switched off, it won't ring for
incoming calls, but the base unit will ring. To answer a
call when the handset is switched off, you need to
switch it back on. It may take a few moments for the
handset to re-establish a radio link with the base unit.
Help Line:
0845 671 0665
(Local Call rate)
. When it
Searching
Keys Locked
,
9